china supplier Elevator Used 50Hz/60Hz 15kw Frequency Inverter for Motor Speed Control manufacturers

Product Description

Elevator Utilised 50Hz/60Hz 15kw Frequency CZPT for CZPT CZPT Management

S3800E Collection Closed-loop vector management – High functionality:  Control of asynchronous motor and synchronous motor are carried out via the higher-overall performance present vector manage technological innovation.
 
Overload potential 60s for a hundred and fifty% of the rated present, 3s for 180%( 120%) of the rated current.
 
Ramp manner: Straight-line ramp S-curve ramp 4 groups of acceleration/deceleration time with the selection of .-6500.0s

Specification

Merchandise            S3800E
Based functions Control mode V/F(Voltage/Frequency) control
Sensorless flux vector control (VC)
Shut-loop vector control (CVC)
Maximum frequency Vector control: 0-320 Hz
V/F control: 0-3200Hz
Carrier frequency one.-sixteen.0 kHz
The carrier frequency is automatically adjusted based on the load features.
Input frequency esolution Dgital setting: 0.01 Hz
Analog setting: 0.571% of maximum frequency
Startup torque G type: 0.5 Hz/a hundred and fifty% (VC) 0 Hz/one hundred eighty% (CVC)
P type: 0.5 Hz/100%
Speed range 1:100 (VC)
1:1000 (CVC)
Speed stability accuracy ± 0.2% (VC)
± 0.02% (CVC)
Torque control  accuracy ± 5% (CVC)
Overload capacity G type: 60s for 150% of the rated current, 3s for 180% of the rated current.
P type: 60s for 120% of the rated current, 3s for 150% of the rated current.
Torque boost Auto boost
Customized boost 0.1%-30.%
V/F  curve Line  V/F  curve
Multi-point V/F  curve
N-power V/F curve (1.2-power, 1.4-energy, 1.6-electricity,1.8-power, square)
V/F  separation two types: complete separation half separation
Ramp mode Straight-line ramp
S-curve ramp
Four groups of acceleration/deceleration time with the range of 0.-6500.0s
DC braking DC braking frequency: 0.00 Hz to maximum frequency
Braking time: 0.-one hundred.0s
Braking action current value: 0.%-one hundred.%
JOG control JOG frequency range: 0.00-50.00 Hz
JOG acceleration/deceleration time: 0.-6500.0s
Onboard multiple preset speeds It implements up to 16 speeds via the simple PLC function or combination of  terminal states
Onboard PID It realizes process-controlled closed loop control system easily.
Auto voltage It can keep constant output voltage automatically when the mains voltage changes.
regulation (AVR)
Overvoltage/ Overcurrent stall control The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/over current.
Torque limit and control It can limit the torque automatically and prevent frequent over current tripping during the running process.Torque control can be implemented in the CVC mode.
Individualized functions Support for multiple PG card Support for rotating transformer PG card,differential input PG card, UVW differential input PG card, resolver PG card and OC input PG card
Power dip ride through The load feedback energy compensates the voltage
reduction so that the AC drive can continue to run for a
short time.
Rapid current limit It helps to avoid frequent over current faults of the AC drive.
High performance Control of asynchronous motor and synchronous motor are
implemented through the high-performance current vector
control technology.
Timing control Time range: 0.-6500.0 minutes
Communication methods MODBUS-RTU,PROFIBUS-DP,CAN
Protection mode Motor short-circuit detection at power-on, input/output
phase loss protection, over current protection, overvoltage
protection, under voltage protection, overheat protection and overload protection.
Input and output Input terminal 8 digital input terminals, one of which supports up to
100 kHz high-speed pulse input.
2 analog input terminals, one of which only supports
-10 V voltage input and the other supports 0-10 V voltage input or 4-20 mA current input.
Frequency source Digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting.
Auxiliary frequency source There are ten auxiliary frequency sources.It can implement
fine tuning of auxiliary frequency and frequency synthesis.
Running command source Operation panel/Control terminals/Serial communication port
You can perform switchover between these sources in
various ways.
Output terminal 1 high-speed pulse output terminal (open-collector) that
supports 0-100 kHz square wave signal output
1 digital output terminal
2 relay output terminal
2 analog output terminal :that supports 0-20 mA current output or 0-10 V voltage output
operation on the operation panel LED display It displays the parameters.
Key locking and It can lock the keys partially or completely and define the
function selection function range of some keys so as to prevent mis-purpose.
Optional parts Rotating transformer PG card,differential input PG card, UVW differential input PG card, resolver PG card and OC input PG card
Environment Installation location Indoor, free from direct sunlight, dust, corrosive gas,
combustible gas, oil smoke, vapour, drip or salt.
Altitude Lower than 1000 m
Ambient temperature  -10°C ~40°C (de-rated if the ambient temperature is
 between 40°C and 50°C)
Humidity Less than 95%RH, without condensing
Vibration Less than 5.9 m/s2 (.6 g)
Storage temperature  -20°C~60°C

 
Target market of S3800 E series inverter                   
 
Extruder                      mill ball 
Elevator and lift                Textile equipment
Paper machinery               Screw output device
Drawing Equipment             Dyeing plant
Injection plastic equipment       Air conditioning system
Machine tool equipment         Boiler system
Chemical fiber equipment      Water supply, oil transportation installation. Etc

We are professional manufacturer supplying with industrial automation products. with the support of our R&D, system engineering and the advantage of the abundant international resources, we have solved many problems by our engineer for different application. We would like to be one of the most popular industry Automation Solution Suppliers. We try to provide wisdom, individual product solution.

Our products have been broadly applied in Textile, Packing, plastic, ceramic, Traffic, Building, Metallurgy, Chemical industry, Light industry, Military industry etc various industry equipment.

We keep on promoting efficiently the competition ability of the technique, quality, service and positive take part in the project of energy program and productivity promotion in industry field. We work hard in environment protection in return for society.

Synchronous motors run at a speed that is synchronous with the frequency of the mains existing. This signifies that in the continual-condition of the motor, the rotation of the shaft is synchronized with the frequency of the supply recent. The period of time of rotation of the shaft is equal to the number of AC cycles. The stator of a synchronous motor has polyphase AC electromagnets. These electromagnets generate a magnetic subject that rotates in synchrony with the present in the wire. The rotor geared up with everlasting magnets or electromagnets rotates synchronously with the stator magnetic discipline to kind the 2nd synchronous rotating magnetic field of the AC motor.
china supplier Elevator Used 50Hz/60Hz 15kw Frequency Inverter for Motor Speed Control manufacturers