Tag Archives: motor 3 phase

China Professional 5.5kw 380V Dongye Made Synchronous Motor Permanent Magnet 3 Phase Electric Motor AC vacuum pump brakes

Product Description

Product Description

TYCP series three-phase permanent magnet synchronous motor mounting size is completely consistent with Y and Y2 series
motors. Customers can directly purchase TYCP series synchronous motors to replace Y and Y2 series asynchronous motors.

Permanent magnet motors have the following advantages:

1. High power factor.

2. High starting torque.

3. Good performance indicators.

4. The efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.

5. When the Y series motor operates at 60% load, the efficiency decreases by 15%, the power factor decreases by 30%, and the force and energy index decreases by 40%; However, the efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.

6. Low temperature rise: There is no resistance loss in the rotor winding and almost no reactive current in the stator winding, resulting in low motor temperature rise.

7. Small size, light weight, and low consumables: The volume, weight, and materials used for permanent magnet synchronous motors of the same capacity can be reduced by about 30%.

8. Capable of atmospheric gap formation, facilitating the formation of new magnetic circuits.

9. The armature has a small reaction and strong overload resistance.

Product Parameters

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 3000R/min
TYCP90S-2.2-30 2.2 3000 150 7 4 88 380 22
TYCP90l-3-30 3 3000 150 9.6 5.4 89.1 380 25
TYCP90l-4-30 4 3000 200 12.7 7.3 90 380 32
TYCP100l-5.5-30 5.5 3000 200 17.5 10 90.9 380 39
TYCP100l-7.5-30 7.5 3000 200 23.9 13.6 91.7 380 46
TYCP132S-11-30 11 3000 200 35 20 92.6 380 55
TYCP132S-15-30 15 3000 200 47.8 27.2 93.3 380 61
TYCP132m-18.5-30 18.5 3000 200 58.9 33.6 93.7 380 88
TYCP160m-22-30 22 3000 200 70 39.9 94 380 108
TYCP160m-30-30 30 3000 200 95.5 54.5 94.5 380 158
TYCP180m-37-30 37 3000 200 117.8 67.2 94.8 380 168
TYCP180m-45-30 45 3000 200 143.3 81.7 95 380 180
TYCP225S-55-30 55 3000 200 175.1 99.8 95.3 380 298
TYCP225S-75-30 75 3000 200 238.8 136.1 95.6 380 320
TYCP225m-90-30 90 3000 200 286.5 163.4 95.8 380 377
TYCP250m-110-30 110 3000 200 350.2 199.7 96 380 401
TYCP250m-132-30 132 3000 200 420.2 239.6 96.2 380 480
TYCP280s-160-30 160 3000 200 509.3 290.4 96.3 380 515
TYCP280m-200-30 200 3000 200 636.7 363 96.5 380 570

 

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 1500R/min
TYCP90S-1.5-15 1.5 1500 75 9.6 2.7 88.2 380 21
TYCP90l-2.2-15 2.2 1500 75 14 4 89.5 380 25
TYCP100l-3-15 3 1500 75 19.1 5.4 90.4 380 29
TYCP100l-4-15 4 1500 100 25.5 7.3 91.1 380 36
TYCP112m-5.5-15 5.5 1500 100 35 10 91.9 380 42
TYCP132m-7.5-15 7.5 1500 100 47.8 13.6 92.6 380 58
TYCP132m-11-15 11 1500 100 70 20 93.3 380 63
TYCP160l-15-15 15 1500 100 95.5 26.8 93.9 380 114
TYCP160l-18.5-15 18.5 1500 100 117.8 33 94.2 380 122
TYCP180m-22-15 22 1500 100 140.1 39.3 94.5 380 165
TYCP180l-30-15 30 1500 100 191 53.6 94.9 380 190
TYCP225S-37-15 37 1500 100 235.6 66.1 95.2 380 290
TYCP225l-45-15 45 1500 100 286.6 80.4 95.4 380 325
TYCP225l-55-15 55 1500 100 350.2 98.3 95.7 380 367
TYCP250m-75-15 75 1500 100 477.5 134 96 380 440
TYCP250m-90-15 90 1500 100 573 160.8 96.1 380 525
TYCP250m-110-15 110 1500 100 700.3 196.5 96.3 380 550
TYCP280m-132-15 132 1500 100 840.4 235.8 96.4 380 608
TYCP280m-160-15 160 1500 100 1018.7 285.8 96.6 380 670

 

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 3000R/min
TYCP90l-1.1-10 1.1 1000 50 10.5 2 84.5 380 25
TYCP90l-1.5-10 1.5 1000 50 14.3 2.7 85.9 380 27
TYCP100l-2.2-10 2.2 1000 50 21 4 87.4 380 29
TYCP112m-3-10 3 1000 66.7 28.7 5.4 88.6 380 41
TYCP132m-4-10 4 1000 66.7 38.2 7.3 89.5 380 43
TYCP132m-5.5-10 5.5 1000 66.7 52.5 10 90.5 380 45
TYCP160l-7.5-10 7.5 1000 66.7 71.6 13.6 91.3 380 99
TYCP160l-11-10 11 1000 66.7 105.1 20 92.3 380 108
TYCP180m-15-10 15 1000 66.7 143.3 27.2 92.9 380 180
TYCP180m-18.5-10 18.5 1000 66.7 176.7 33.6 93.4 380 187
TYCP225s-22-10 22 1000 66.7 210.1 39.9 93.7 380 298
TYCP225m-30-10 30 1000 66.7 286.5 54.5 94.2 380 305
TYCP225m-37-10 37 1000 66.7 353.4 67.2 94.5 380 315
TYCP250m-45-10 45 1000 66.7 429.8 81.7 94.8 380 379
TYCP250m-55-10 55 1000 66.7 525.3 99.8 95.1 380 387
TYCP280s-75-10 75 1000 66.7 716.3 136.1 95.4 380 520

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price
What we do:

1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Household Appliances, Industrial, Power Tools
Operating Speed: Adjust Speed
Operation Mode: Electric Motor
Magnetic Structure: Permanent Magnet
Function: Driving, Control
Structure: Rotating Pole Type (Armature Fixed)
Samples:
US$ 139.66/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China Professional 5.5kw 380V Dongye Made Synchronous Motor Permanent Magnet 3 Phase Electric Motor AC   vacuum pump brakesChina Professional 5.5kw 380V Dongye Made Synchronous Motor Permanent Magnet 3 Phase Electric Motor AC   vacuum pump brakes
editor by CX 2024-05-14

China factory 3 Phase Induction Motor AC Electric Motor AC Synchronous Motor IEC Electric Motor supplier

Product Description

Product Description:

(IE3/IE2) Ye3-100L-2 (3kW/4HP) Three phase AC Electric Motor CCC CE for Pump Fans Universal Machines OEM ODM OBM High Efficiency Motor IEC Standard have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noise. little vibration,at the same time, lightweight and simple construction. These motors can be used for general drives.

Applications: General purpose including cutting machines, pumps, fans, conveyors, machines tools of farm duty and food process.

Features : High efficiency and energy saving, low noise and little vibration.

Insulation class : F
Protection class: IP54

Altitude: < 1000m above sea level
Ambient temperature: -15°C ~ 40ºC

 

company introduction:
HangZhou UP CHINAMFG MACHINRY CO.,LTD. is a research and development,manufacturing, sales as 1 of the enterprises. The company’s main business is small and medium-sized asynchronous AC motor, Our main products include YC/YCL series single-phase capacitor starting asynchronous motors, YL series single-phase double–value capacitor asynchronous motors, MS series high-efficiency three-phase asynchronous motors with aluminum shell,YS Series three-phase asynchronous motor, YE3/YE4 series square type aluminum shell motor (71-160 frame),YD series variable pole multi-speed three-phase asynchronous motor, YE3 series high efficiency three-phase asynchronous motor YE4 series ultra-high efficiency three–phase asynchronous motor, YE5 series ultra-high efficiency three-phase asynchronous motor, etc.
The company in line with the “superior quality, first-class service” for the purpose, hot pillow look CHINAMFG to cooperating with customers from all over the world to create brilliant!

 

Workshop display:

 

Factory Advantages:

1.Professional workman inspecting spare parts every processing.

2.Guaranteed Quality 
We have best quality materials to make our electric motors best performance.Our products are 100% brand new , 100% cooper wire.  It is newly designed in conformity with the relevant rules of IEC standards, Strictly and Perfect Management is guaranteed for Production

3.Professional Service
 We valuing every customer. We’d like to assist you arranging delivery things, test things or others on your request.

4. Fast delivery time, Normal models about 15-20days , another not normal models need about 30days

5.We have advanced winding , painting, assembly and packing etc. production line which make our products nice appearance, good performance and well packaged.

6. Electric motor will 100% check again before packing.
An electric motor from material to finish motor, must pass 15 time check, and 100% testing, output power, voltage, electric current, non-load, 50% load, 75% load, 100% load and check the nameplate, packing. Finally shipping to our customer.

7.We have professional financial department who are good at calculating and controlling the cost and capital operationwhich  could make most favorable prices for our customers.

 

Certification:

Our Service:     
1. We valuing every customer.
2. We cooperate with customer to design and develop new product. Provide OEM.
3. 25-30 days leading time.
4. We’d like to assist you arranging delivery things, test things or others on your request.

Why us?
1. Our Manufacturer is a professional factory for Electric Motor in China
2. Have good price in China
3. Full of export experiences.
4. 100% tested for the quality prior to shipment
5. Special motors can be designed according to customers’ requirements
 6. Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.
7. Reliable in country, city or factory environments
10. Sincere and Professional Service

FAQ:
Q: What is your delivery time?

A: Within 20~25 days after receiving deposit. 

 
Q: What is your MOQ of this item ?

A: 10 PCS per item.   

Q: Can we type our brand on it?

A: Yes of course.

Q: Where is your loading port ?

A: HangZhou Port, ZheJiang Port, China.

Q: What is your production capacity?

A: About 1000 PCS per day.

Ordering instructions:
1.Please indicate the motor type,rated output,rated voltage,rated frequency,synchronous speed,Explosion proof Mark,mounting type, 
2.If have special request,For example: the voltage, frequency,protection class,duplex shaft,direction of rotation.temperature monitoring device,please indicate in details in the ordering contract and CHINAMFG technical agreement if necessary 

 

If you are looking for new better supplier or purchase electric motors, please feel free contact us now.You will get all what you want.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial, Universal, Power Tools
Operating Speed: High Speed
Number of Stator: Three-Phase
Species: Y, Y2 Series Three-Phase
Rotor Structure: Winding Type
Casing Protection: Protection Type
Samples:
US$ 85/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China factory 3 Phase Induction Motor AC Electric Motor AC Synchronous Motor IEC Electric Motor   supplier China factory 3 Phase Induction Motor AC Electric Motor AC Synchronous Motor IEC Electric Motor   supplier
editor by CX 2024-05-13

China best Dongye Made Synchronous Motor 3.7kw Permanent Magnet 3 Phase 380V Electric Motor AC a/c vacuum pump

Product Description

Product Description

TYCP series three-phase permanent magnet synchronous motor mounting size is completely consistent with Y and Y2 series
motors. Customers can directly purchase TYCP series synchronous motors to replace Y and Y2 series asynchronous motors.

Permanent magnet motors have the following advantages:

1. High power factor.

2. High starting torque.

3. Good performance indicators.

4. The efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.

5. When the Y series motor operates at 60% load, the efficiency decreases by 15%, the power factor decreases by 30%, and the force and energy index decreases by 40%; However, the efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.

6. Low temperature rise: There is no resistance loss in the rotor winding and almost no reactive current in the stator winding, resulting in low motor temperature rise.

7. Small size, light weight, and low consumables: The volume, weight, and materials used for permanent magnet synchronous motors of the same capacity can be reduced by about 30%.

8. Capable of atmospheric gap formation, facilitating the formation of new magnetic circuits.

9. The armature has a small reaction and strong overload resistance.

Product Parameters

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 3000R/min
TYCP90S-2.2-30 2.2 3000 150 7 4 88 380 22
TYCP90l-3-30 3 3000 150 9.6 5.4 89.1 380 25
TYCP90l-4-30 4 3000 200 12.7 7.3 90 380 32
TYCP100l-5.5-30 5.5 3000 200 17.5 10 90.9 380 39
TYCP100l-7.5-30 7.5 3000 200 23.9 13.6 91.7 380 46
TYCP132S-11-30 11 3000 200 35 20 92.6 380 55
TYCP132S-15-30 15 3000 200 47.8 27.2 93.3 380 61
TYCP132m-18.5-30 18.5 3000 200 58.9 33.6 93.7 380 88
TYCP160m-22-30 22 3000 200 70 39.9 94 380 108
TYCP160m-30-30 30 3000 200 95.5 54.5 94.5 380 158
TYCP180m-37-30 37 3000 200 117.8 67.2 94.8 380 168
TYCP180m-45-30 45 3000 200 143.3 81.7 95 380 180
TYCP225S-55-30 55 3000 200 175.1 99.8 95.3 380 298
TYCP225S-75-30 75 3000 200 238.8 136.1 95.6 380 320
TYCP225m-90-30 90 3000 200 286.5 163.4 95.8 380 377
TYCP250m-110-30 110 3000 200 350.2 199.7 96 380 401
TYCP250m-132-30 132 3000 200 420.2 239.6 96.2 380 480
TYCP280s-160-30 160 3000 200 509.3 290.4 96.3 380 515
TYCP280m-200-30 200 3000 200 636.7 363 96.5 380 570

 

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 1500R/min
TYCP90S-1.5-15 1.5 1500 75 9.6 2.7 88.2 380 21
TYCP90l-2.2-15 2.2 1500 75 14 4 89.5 380 25
TYCP100l-3-15 3 1500 75 19.1 5.4 90.4 380 29
TYCP100l-4-15 4 1500 100 25.5 7.3 91.1 380 36
TYCP112m-5.5-15 5.5 1500 100 35 10 91.9 380 42
TYCP132m-7.5-15 7.5 1500 100 47.8 13.6 92.6 380 58
TYCP132m-11-15 11 1500 100 70 20 93.3 380 63
TYCP160l-15-15 15 1500 100 95.5 26.8 93.9 380 114
TYCP160l-18.5-15 18.5 1500 100 117.8 33 94.2 380 122
TYCP180m-22-15 22 1500 100 140.1 39.3 94.5 380 165
TYCP180l-30-15 30 1500 100 191 53.6 94.9 380 190
TYCP225S-37-15 37 1500 100 235.6 66.1 95.2 380 290
TYCP225l-45-15 45 1500 100 286.6 80.4 95.4 380 325
TYCP225l-55-15 55 1500 100 350.2 98.3 95.7 380 367
TYCP250m-75-15 75 1500 100 477.5 134 96 380 440
TYCP250m-90-15 90 1500 100 573 160.8 96.1 380 525
TYCP250m-110-15 110 1500 100 700.3 196.5 96.3 380 550
TYCP280m-132-15 132 1500 100 840.4 235.8 96.4 380 608
TYCP280m-160-15 160 1500 100 1018.7 285.8 96.6 380 670

 

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 3000R/min
TYCP90l-1.1-10 1.1 1000 50 10.5 2 84.5 380 25
TYCP90l-1.5-10 1.5 1000 50 14.3 2.7 85.9 380 27
TYCP100l-2.2-10 2.2 1000 50 21 4 87.4 380 29
TYCP112m-3-10 3 1000 66.7 28.7 5.4 88.6 380 41
TYCP132m-4-10 4 1000 66.7 38.2 7.3 89.5 380 43
TYCP132m-5.5-10 5.5 1000 66.7 52.5 10 90.5 380 45
TYCP160l-7.5-10 7.5 1000 66.7 71.6 13.6 91.3 380 99
TYCP160l-11-10 11 1000 66.7 105.1 20 92.3 380 108
TYCP180m-15-10 15 1000 66.7 143.3 27.2 92.9 380 180
TYCP180m-18.5-10 18.5 1000 66.7 176.7 33.6 93.4 380 187
TYCP225s-22-10 22 1000 66.7 210.1 39.9 93.7 380 298
TYCP225m-30-10 30 1000 66.7 286.5 54.5 94.2 380 305
TYCP225m-37-10 37 1000 66.7 353.4 67.2 94.5 380 315
TYCP250m-45-10 45 1000 66.7 429.8 81.7 94.8 380 379
TYCP250m-55-10 55 1000 66.7 525.3 99.8 95.1 380 387
TYCP280s-75-10 75 1000 66.7 716.3 136.1 95.4 380 520

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price
What we do:

1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Household Appliances, Industrial, Power Tools
Operating Speed: Adjust Speed
Operation Mode: Electric Motor
Magnetic Structure: Permanent Magnet
Function: Driving, Control
Structure: Rotating Pole Type (Armature Fixed)
Samples:
US$ 136/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China best Dongye Made Synchronous Motor 3.7kw Permanent Magnet 3 Phase 380V Electric Motor AC   a/c vacuum pump		China best Dongye Made Synchronous Motor 3.7kw Permanent Magnet 3 Phase 380V Electric Motor AC   a/c vacuum pump
editor by CX 2024-05-08

China manufacturer Hot Selling 4kw 8.3A 1500r/Min Synchronous Motor AC 3 Phase Electric Motor vacuum pump engine

Product Description

Product Description

Three-Phase Motor is an electric motor driven by a three-phase AC power source.
They are widely used as power sources for industrial equipment and machinery. Also called three-phase induction motors (induction motors), they are generally powered by a three-phase AC power supply of 200 V, 110V, 380V and so on.
Three-Phase Motors consist of a stator, rotor, output shaft, flange bracket, and ball bearings.

YS (MS), YE3, Y4 Motor Series

YS (MS), YE3, YE4 series three-phase asynchronous motors with Aluminum housing adopted the newest design and high quality material.lt is conformity with the IEC 34-1 standards. The efficiency of the motors can meet EFF2 and EFF1 if requested. That good features: perfect performance low noises light vibration, reliable running, good appearance, small volume and light weight.

YEJ Brake Motor Series

Brake motor is made of 2 parts: three-phase asynchronous motors and brake, it belongs to three-phase-asynchronous motor derived series. Manual brake release and bolt release are 2 forms of brake. Brake is the main components of the brake motor. Its working power divided into 2 categories: One is AC braking, the other is DC braking.  Our company produces brake motors are DC brake motors, the advantage of the braking torque is below, easy installation, braking response speed, high reliability, versatility and other advantages.

To the Ac power to the brake coil is provided with suction cups for low voltage winding rated DC voltage. A single-phase AC power is rectified then supply to a sucker winding to make it work so the brake motor terminal box fitted with a rectifier, wiring diagram below.Brake motor braking time (t) is the time from the motor and brake stopping the power to the shaft completely stopped, under normal circumstances, for 63 to 880 frame size motor, the braking time is 0.5 seconds. For o-132 frame size motor the braking time is 1 second, For 160 to180 frame size motor, the braking time is 2 seconds.

YVP Frequency Conversion Motor Series

YVP speed has become the popular way, can be widely used in various industries continuously variable transmission.
In the variable frequency motor speed control system, using power electronic inverter as a power supply is inevitable that there will be high harmonics, harmonic greater impact on the motor. Mainly reflected in the magnetic circuit and the circuit harmonic magnetic potential harmonic currents. Different amplitudes and frequencies of harmonic currents and magnetic flux will cause the motor stator copper loss rotor aluminum consumption. These losses of the motor efficiency and power factor reduction, the majority of these losses into heat, causing additional heating of the motor, causing the motor temperature increases, the increase in temperature generally 10~20%. As a result of electromagnetic interference power, conduction and radiation, the stator winding insulation aging, resulting in deterioration of the common-mode voltage and leakage current of accelerated beaning, bearing perishable, while the motor screaming. Since harmonic electromagnetic torque constant harmonic electromagnetic torque and vibration harmonic MMFs and rear rotor harmonic current synthesis. The torque of the motor torque will generate pulsating issued, so that the motor speed vibration is low.
Our produce YS, IE2, IE3, IE4 Series Universal three-phase asynchronous motor design, our main consideration is the motor overload, starting performance, efficiency and power factor. Another major consideration for non-sinusoidal motor power adaptability. Suppose the influence of higher harmonic current to the motor. Since the motor is increased when the working
Temperature of the low-frequency region, class F insulation dl ass above, the use of polymer insulation materials and vacuum pressure impregnation process, and the use of special insulation structure. Ln order to reduce the electromagnetic torque ripple, improve the precision mechanical parts to improve the quality level constant. high-precision bearing mute. n order to eliminate vibration motor, the motor structure to strengthen the overall design.

Operating conditions:

Ambient temperature: -15ºC<0<40ºC Duty:  S1 (continuous)
Altitude: not exceed1000m Insulation class:  B/F/H
Rated voltage: 380V, 220V-760Vis available Protection class: lP54/IP55
Rated frequency: 50HZ/60HZ Cooling method:  IC0141

Production Flow

Product Overall & Installation Dimensions:

YS/MS Series:

 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 135 215 285
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 206 206 150 250 376
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 222 228 170 285 400
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 460
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 500
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 615
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 675
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 700
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 740

YE3, YE4 Series:
 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 145 215 305
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 360
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 385
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 270 206 175 250 445
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 270 228 190 285 455
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 475
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 570
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 655
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 685
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 705
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 745

YEJ B3 Series H63-180:
 

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 Φ7 135 120×120 167 255
71 112 90 45 Φ14 30 5 16 71 Φ7 137 130×130 178 305
80M 125 100 50 Φ19 40 6 21.5 80 Φ10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
90L 140 125 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 Φ12 200 185×185 240 440
112M 190 140 70 Φ28 60 8 31 112 Φ12 230 200×200 270 480
132S 216 140 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
132M 216 178 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
160M 254 210 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
160L 254 254 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
180M 279 241 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880

YEJ B5 Series H63-180:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 255
71 Φ14 30 5 16 130 110 160 10 3 130×130 107 305
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 440
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 480
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
160M Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
160L Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
180M Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880
180L Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880

YEJ B14 Series H63-112:
 

Frame size  Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 255
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 305
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 440
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 480

YVP B3 Series H63-180:

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 7 135 120×120 167 260
71 112 90 45 Φ14 30 5 16 71 7 137 130×130 178 295
80 125 100 50 Φ19 40 6 21.5 80 10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 10 175 160×160 205 390
90L 140 125 56 Φ24 50 8 27 90 10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 12 200 185×185 240 430
112M 190 140 70 Φ28 60 8 31 112 12 230 200×200 270 460
132S 216 140 89 Φ38 80 10 41 132 12 270 245×245 315 525
132M 216 178 89 Φ38 80 10 41 132 12 270 245×245 315 525
160M 254 210 108 Φ42 110 12 45 160 14.5 320 335×335 450 850
160L 254 254 108 Φ42 110 12 45 160 14.5 320 335×335 450 870
180M 279 241 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 980

YVP B5 Series H63-180:
 

C Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 260
71 Φ14 30 5 16 130 110 160 10 3.5 130×130 107 295
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 390
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 430
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 460
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 525
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 252
160M Φ42 110 12 45 300 250 350 18.5 5 335×335 290 850
160L Φ42 110 12 45 300 250 350 18.5 5 335×335 290 870
180M Φ48 110 14 51.5 300 250 350 18.5 5 370×370 340 880
180L Φ48 110 14 51.5 300 250 350 18.4 5 370×370 340 980

YVP B14 Series H63-112:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 260
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 295
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 390
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 430
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 460

 

Product Parameters

YS/MS Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE2) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YS-5612 0.09  1/8 2680 62.0 0.68 0.32 0.307 2.3 2.3 6.0
YS-5622 0.12  1/6 2660 67.0 0.71 0.38 0.410 2.3 2.3 6.0
YS-6312 0.18  1/4 2710 69.0 0.75 0.53 0.614 2.3 2.3 6.0
YS-6322 0.25  1/3 2730 72.0 0.78 0.68 0.853 2.3 2.3 6.0
YS-7112 0.37  1/2 2760 73.5 0.80 0.96 1.260 2.3 2.3 6.0
YS-7122 0.55  3/4 2770 75.5 0.82 1.35 1.880 2.3 2.3 6.0
YS-8012 0.75 1.0 2770 76.5 0.85 1.75 2.560 2.2 2.3 6.0
YS-8571 1.10 1.5 2800 77.0 0.85 2.55 3.750 2.2 2.3 7.0
YS-90S-2 1.50 2.0 2840 78.5 0.85 3.42 5.040 2.2 2.3 7.0
YS-90L-2 2.20 3.0 2840 81.0 0.86 4.80 7.400 2.2 2.3 7.0
YS-100L-2 3.00 4.0 2890 84.6 0.87 6.17 9.910 2.2 2.3 7.8
YS-5614 0.06 1/12 1320 56.0 0.58 0.28 0.410 2.4 2.4 6.0
YS-5624 0.09  1/8 1320 58.0 0.61 0.39 0.614 2.4 2.4 6.0
YS-6314 0.12  1/6 1350 60.0 0.63 0.48 0.819 2.4 2.4 6.0
YS-6324 0.18  1/4 1350 64.0 0.66 0.65 1.230 2.4 2.4 6.0
YS-7114 0.25  1/3 1350 67.0 0.68 0.83 1.710 2.4 2.4 6.0
YS-7124 0.37  1/2 1350 69.5 0.72 1.12 2.520 2.4 2.4 6.0
YS-8014 0.55  3/4 1380 73.5 0.73 1.56 3.750 2.4 2.4 6.0
YS-8571 0.75 1.0 1390 75.5 0.75 2.01 5.120 2.3 2.4 6.5
YS-90S-4 1.10 1.5 1400 78.0 0.78 2.75 7.400 2.3 2.4 6.5
YS-90L-4 1.50 2.0 1400 79.0 0.79 3.65 10.100 2.3 2.4 6.5
YS-100L1-4 2.20 3.0 1440 84.3 0.81 4.90 14.600 2.3 2.3 7.6
YS-100L2-4 3.00 4.0 1440 85.5 0.82 6.50 19.900 2.3 2.3 7.6
YS-7116 0.18 1/4 910 59.0 0.61 0.76 1.890 2.0 2.0 5.5
YS-7126 0.25 1/3 910 63.0 0.62 0.97 2.260 2.0 2.0 5.5
YS-8016 0.37 1/2 910 68.0 0.62 1.33 3.880 2.0 2.0 5.5
YS-8026 0.55 3/4 910 71.0 0.64 1.84 5.770 2.0 2.0 5.5
YS-90S-6 0.75 1.0 920 73.0 0.68 2.30 7.790 2.0 2.1 5.5
YS-90L-6 1.10 1.5 920 74.0 0.70 3.23 11.400 2.0 2.1 6.0
YS-100L-6 1.50 2.0 940 79.0 0.75 3.38 15.200 2.0 2.1 6.5
YS-711-8 0.09 0.12 600 40.0 0.57 0.60 1.950 1.8 1.9 2.8
YS-712-8 0.12 0.18 600 45.0 0.57 0.71 2.160 1.8 1.9 2.8
YS-801-8 0.18 0.25 645 51.0 0.61 0.88 2.490 1.8 2.0 3.3
YS-802-8 0.25 0.37 645 54.0 0.61 1.15 3.640 1.8 2.0 3.3
YS-90S-8 0.37 0.50 670 62.0 0.61 1.49 5.120 1.8 2.0 4.0
YS-90L-8 0.55 0.75 670 63.0 0.61 2.17 7.610 1.8 2.1 4.0

YE3 Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE3) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YE3-801-2 0.75 1.0 2880 80.7 0.82 1.72 2.49 2.3 2.3 7.0
YE3-802-2 1.10 1.5 2880 82.7 0.83 2.43 3.65 2.2 2.3 7.3
YE3-90S-2 1.50 2.0 2895 84.2 0.84 3.22 4.95 2.2 2.3 7.6
YE3-90L-2 2.20 3.0 2895 85.9 0.85 4.58 7.26 2.2 2.3 7.6
YE3-100L-2 3.00 4.0 2895 87.1 0.87 6.02 9.90 2.2 2.3 7.8
YE3-160L-2 18.50 25.0 2940 92.4 0.89 34.20 60.10 2.0 2.3 8.2
YE3-802-4 0.75 1.0 1420 82.5 0.75 1.84 5.04 2.3 2.3 6.6
YE3-90s-4 1.10 1.5 1445 84.1 0.76 2.61 7.27 2.3 2.3 6.8
YE3-90L-4 1.50 2.0 1445 85.3 0.77 3.47 9.91 2.3 2.3 7.0
YE3-100L1-4 2.20 3.0 1435 86.7 0.81 4.76 14.60 2.3 2.3 7.6
YE3-100L2-4 3.00 4.0 1435 87.7 0.82 6.34 20.00 2.3 2.3 7.6
YE3-112M-4 4.00 5.5 1440 88.6 0.82 8.37 26.50 2.2 2.3 7.8
YE3-132S-4 5.50 7.5 1460 89.6 0.83 11.20 36.00 2.0 2.3 7.9
YE3-132M-4 7.50 10.0 1460 90.4 0.84 15.00 49.10 2.0 2.3 7.5
YE3-160M-4 11.00 15.0 1465 91.4 0.85 21.50 71.70 2.2 2.3 7.7
YE3-160L-4 15.00 20.0 1465 92.1 0.86 28.80 97.80 2.2 2.3 7.8
YE3-180M-4 18.50 25.0 1470 92.6 0.86 35.30 120.20 2.0 2.3 7.8
YE3-180L-4 22.00 30.0 1470 93 0.86 41.80 142.90 2.0 2.3 7.8
YE3-90S-6 0.75 1.0 935 78.9 0.71 2.03 7.66 2.0 2.1 6.0
YE3-90L-6 1.10 1.5 945 81 0.73 2.83 11.10 2.0 2.1 6.0
YE3-100L-6 1.50 2.0 949 82.5 0.73 3.78 15.10 2.0 2.1 6.5
YE3-112M-6 2.20 3.0 955 84.3 0.74 5.36 22.00 2.0 2.1 6.6
YE3-132S-6 3.00 4.0 968 85.6 0.74 7.20 29.60 2.0 2.1 6.8
YE3-132M1-6 4.00 5.5 968 86.8 0.74 9.46 39.50 2.0 2.1 6.8
YE3-132M2-6 5.50 7.5 968 88 0.75 12.70 54.30 2.0 2.1 7.0
YE3-160M-6 7.50 10.0 970 89.1 0.79 16.20 73.80 2.0 2.1 7.0
YE3-160L-6 11.00 15.0 970 90.3 0.8 23.10 108.30 2.0 2.1 6.2
YE3-180L-6 18.50 20.0 975 91.2 0.81 30.90 146.90 2.0 2.1 7.3

YE4 Series:

  OUTPUT RATED CURRENT ROTATE SPEED EFFICIENCY POWER FOCTOR RATED TORQUE LOCKED ROTOR TORQUE LOCKED ROTOR CURRENT MAXIMUM TORQUE NOISE
TYPE RATED TORQUE RATED CURRENT RATED TORQUE
  kW A r/min Eff.%(IE4) P.F N.m Tst Ist Tmax dB(A)
  TN IN TN
SYNCHRO-SPEED 3000r/min
YE4-80M1-2 0.75 1.6 2895 83.5 0.83 2.47 2.2 8.5 2.3 62
YE4-80M2-2 1.1 2.4 2895 85.2 0.83 3.63 2.2 8.5 2.3 62
YE4-90S-2 1.5 3.1 2880 86.5 0.85 4.97 2.2 9.0 2.3 67
YE4-90L-2 2.2 4.4 2880 88.0 0.86 7.30 2.2 9.0 2.3 67
YE4-100L-2 3 5.9 2905 89.1 0.87 9.86 2.2 9.5 2.3 74
YE4-112M-2 4 7.7 2920 90.0 0.88 13.10 2.2 9.5 2.3 77
YE4-132S1-2 5.5 10.4 2945 90.0 0.88 17.80 2.0 9.5 2.3 79
YE4-132S2-2 7.5 14 2940 91.7 0.89 24.40 2.0 9.5 2.3 79
YE4-160M1-2 11 20.3 2965 92.6 0.89 35.40 2.0 9.5 2.3 81
YE4-160M2-2 15 27.5 2965 93.3 0.89 48.30 2.0 9.5 2.3 81
YE4-160L-2 18.5 33.7 2965 93.7 0.89 59.60 2.0 9.5 2.3 81
SYNCHRO-SPEED1500r/min
YE4-80M1-4 0.55 1.4 1440 83.9 0.74 3.65 2.4 6.6 2.3 56
YE4-80M2-4 0.75 1.8 1440 85.7 0.74 4.97 2.3 8.5 2.3 56
YE4-90S-4 1.1 2.6 1445 87.2 0.75 7.27 2.3 8.5 2.3 59
YE4-90L-4 1.5 3.4 1445 88.2 0.76 9.91 2.3 9.0 2.3 59
YE4-100L1-4 2.2 4.7 1450 89.5 0.79 14.50 2.3 9.0 2.3 64
YE4-100L2-4 3 6.3 1450 90.4 0.8 19.80 2.3 9.5 2.3 64
YE4-112M-4 4 8.3 1460 91.1 0.8 26.20 2.3 9.5 2.3 65
YE4-132S-4 5.5 11.4 1475 91.1 0.8 35.60 2.0 9.5 2.3 71
YE4-132M-4 7.5 15.2 1470 92.6 0.81 48.70 2.0 9.5 2.3 71
YE4-160M-4 11 21.6 1470 93.3 0.83 71.50 2.0 9.5 2.3 73
YE4-160L-4 15 28.9 1470 93.9 0.84 97.40 2.0 9.5 2.3 73
SYNCHRO-SPEED1000r/min
YE4-80M1-6 0.37 1.1 940 78.0 0.68 3.76 1.9 6.0 2.1 54
YE4-80M2-6 0.55 1.5 940 80.9 0.68 5.59 1.9 6.0 2.1 54
YE4-90S-6 0.75 2 950 82.7 0.7 7.54 2.1 7.5 2.1 57
YE4-90L-6 1.1 2.8 950 84.5 0.7 11.10 2.1 7.5 2.1 57
YE4-100L-6 1.5 3.7 960 85.9 0.71 14.90 2.1 7.5 2.1 61
YE4-112M-6 2.2 5.4 975 87.4 0.71 21.50 2.1 7.5 2.1 65
YE4-132S-6 3 7.2 985 88.6 0.71 29.10 2.0 7.5 2.1 69
YE4-132M1-6 4 9.4 985 89.5 0.72 38.80 2.0 8.0 2.1 69
YE4-132M2-6 5.5 12.8 980 90.5 0.72 53.60 2.0 8.0 2.1 69
YE4-160M-6 7.5 16.4 980 91.3 0.76 73.10 2.0 8.0 2.1 73
YE4-160L-6 11 23.5 980 92.3 0.77 107.00 2.0 8.5 2.1 73

YEJ 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 3.5 0.10
YEJ-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 3.5 0.10
YEJ-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 4.0 0.10
YEJ-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 4.0 0.10
YEJ-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 7.5 0.10
YEJ-802-2 1.10 2840 77.0 0.84 2.55 3.70 2.2 2.3 7.5 0.10
YEJ-90S-2 1.50 2840 79.0 0.84 3.39 5.04 2.2 2.3 15 0.15
YEJ-90L-2 2.20 2840 81.0 0.85 4.80 7.40 2.2 2.3 15 0.15
YEJ-100L1-2 3.00 2860 83.0 0.87 6.31 10.00 2.2 2.3 30 0.15
YEJ-100L2-2 4.00 2880 85.0 0.88 8.22 13.30 2.2 2.3 40 0.15
YEJ-112M-2 5.50 2910 86.0 0.88 11.2 18.00 2.2 2.3 80 0.15
YEJ-132S-2 7.00 2910 87.0 0.88 15.1 24.60 2.2 2.3 80 0.15
YEJ-132M-2 11.00 2930 88.0 0.89 21.3 35.90 2.2 2.3 150 0.30
YEJ-160M-2 15.00 2930 89.0 0.89 28.8 48.90 2.2 2.2 150 0.30
YEJ-160L-2 18.50 2935 90.0 0.90 34.7 60.20 2.2 2.2 150 0.30
YEJ-180M-2 22.00 2935 90.0 0.90 41.3 71.60 2.2 2.2 200 0.30

YEJ 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 3.5 0.10
YEJ-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 3.5 0.10
YEJ-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 4.0 0.10
YEJ-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 4.0 0.10
YEJ-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 7.5 0.10
YEJ-802-4 0.75 1405 73.0 0.76 2.02 5.10 2.2 2.4 7.5 0.10
YEJ-90S-4 1.10 1445 75.0 0.77 2.82 7.27 2.2 2.3 15 0.15
YEJ-90L-4 1.50 1445 78.0 0.79 3.7 9.91 2.2 2.3 15 0.15
YEJ-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 30 0.15
YEJ-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 30 0.15
YEJ-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 40 0.15
YEJ-132S-4 5.50 1440 85.0 0.83 11.7 36.50 2.2 2.3 80 0.15
YEJ-132M-4 7.50 1440 87.0 0.84 15.6 49.70 2.2 2.3 80 0.15
YEJ-160M-4 11.00 1450 88.0 0.85 21.3 72.40 2.2 2.2 150 0.30
YEJ-160L-4 15.00 1450 89.0 0.85 30.1 98.80 2.2 2.2 150 0.30
YEJ-180M-4 18.50 1455 90.5 0.86 36.5 121.40 2.2 2.2 150 0.30
YEJ-180L-4 22.00 1455 91.0 0.86 43.1 144.40 2.0 2.2 200 0.30

YEJ 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-711-6 0.18 900 56.0 0.66 0.71 19.10 1.9 2.0 4.0 0.10
YEJ-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 4.0 0.10
YEJ-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 7.5 0.10
YEJ-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 7.5 0.10
YEJ-90S-6 0.75 930 69.0 0.72 2.26 7.70 2.1 2.1 15 0.15
YEJ-90L-6 1.10 940 72.0 0.73 3.14 11.20 2.1 2.1 15 0.15
YEJ-100L-6 1.50 940 76.0 0.76 3.95 15.20 2.2 2.1 30 0.15
YEJ-112M-6 2.20 96o 79.0 0.76 5.57 21.90 2.2 2.1 40 0.15
YEJ-132S-6 3.00 960 81.0 0.76 7.40 29.80 2.2 2.1 80 0.15
YEJ-132M1-6 4.00 960 82.0 0.76 9.63 39.80 2.2 2.1 80 0.15
YEJ-132M2-6 5.50 960 84.0 0.77 12.90 54.70 2.2 2.1 150 0.30
YEJ-160M-6 7.50 970 86.0 0.77 17.00 73.80 1.8 2.1 150 0.30
YEJ-160L-6 11.00 970 87.5 0.78 24.30 108.30 1.9 2.1 150 0.30
YEJ-180L-6 15.00 970 89.0 0.81 31.60 147.70 2.1 2.1 200 0.30

YVP 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 380 220 2800
YVP-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 380 220 2800
YVP-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 380 220 2800
YVP-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 380 220 2800
YVP-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 380 220 2800
YVP-802-2 1.10 2840 77.0 0.85 2.55 3.70 2.2 2.3 380 220 2800
YVP-90S-2 1.50 2840 79.0 0.85 3.39 5.04 2.2 2.3 380 220 2800
YVP-90L-2 2.20 2840 81.0 0.86 4.80 7.40 2.2 2.3 380 220 2800
YVP-100L-2 3.00 2860 83.0 0.87 6.31 10.0 2.2 2.3 380 220 2800
YVP-112M-2 4.00 2880 84.0 0.88 8.22 13.3 2.2 2.3 380 220 2800
YVP-132S1-2 5.50 2910 85.0 0.88 11.2 18.0 2.2 2.3 380 220 2800
YVP-132S2-2 7.50 2910 86.0 0.88 15.1 24.6 2.2 2.3 380 220 2800
YVP-160M1-2 11.0 2930 88.0 0.89 21.3 35.9 2.2 2.3 380 220 2800
YVP-160M2-2 15.0 2930 89.0 0.89 28.8 48.9 2.2 2.3 380 220 2800
YVP-160L-2 18.5 2935 90.0 0.90 34.7 60.2 2.2 2.3 380 220 2800
YVP-180M-2 22.0 2935 90.0 0.90 41.3 71.6 2.0 2.3 380 220 2800

YVP 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 380 220 2800
YVP-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 380 220 2800
YVP-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 380 220 2800
YVP-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 380 220 2800
YVP-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 380 220 2800
YVP-802-4 0.75 1405 73.0 0.77 2.02 5.10 2.2 2.4 380 220 2800
YVP-90S-4 1.10 1445 75.0 0.79 2.82 7.27 2.2 2.3 380 220 2800
YVP-90L-4 1.50 1445 78.0 0.79 3.70 9.91 2.2 2.3 380 220 2800
YVP-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 380 220 2800
YVP-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 380 220 2800
YVP-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 380 220 2800
YVP-132S-4 5.50 1440 85.0 0.84 11.70 36.50 2.2 2.3 380 220 2800
YVP-132M-4 7.50 1440 87.0 0.84 15.60 49.70 2.2 2.3 380 220 2800
YVP-160M-4 11.0 1450 88.0 0.85 21.30 72.40 2.2 2.2 380 220 2800
YVP-160L-4 15.0 1450 89.0 0.85 30.10 98.80 2.2 2.2 380 220 2800
YVP-180M-4 18.5 1455 90.5 0.86 36.50 121.40 2.2 2.2 380 220 2800
YVP-180L-4 22.0 1455 91.0 0.86 43.10 144.40 2.0 2.2 380 220 2800

YVP 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-711-6 0.18 900 58.0 0.66 0.71 1.91 1.9 2.0 380 220 2800
YVP-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 380 220 2800
YVP-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 380 220 2800
YVP-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 380 220 2800
YVP-90S-6 0.75 930 70.0 0.72 2.26 7.70 2.1 2.1 380 220 2800
YVP-90L-6 1.10 940 73.0 0.73 3.14 11.2 2.1 2.1 380 220 2800
YVP-100L-6 1.50 940 76.0 0.76 3.95 15.2 2.2 2.1 380 220 2800
YVP-112M-6 2.20 960 79.0 0.76 5.57 21.9 2.2 2.1 380 220 2800
YVP-132S-6 3.00 960 81.0 0.76 7.40 29.8 2.2 2.1 380 220 2800
YVP-132M1-6 4.00 960 83.0 0.76 9.63 39.8 2.2 2.1 380 220 2800
YVP-132M2-6 5.50 960 84.0 0.77 12.9 54.7 2.2 2.1 380 220 2800
YVP-160M-6 7.50 970 86.0 0.78 17.0 73.8 1.8 2.1 380 220 2800
YVP-160L-6 11.0 970 87.0 0.79 24.3 108.3 1.9 2.1 380 220 2800
YVP-180L-6 15.0 970 89.0 0.81 31.6 147.7 2.1 2.1 380 220 2800

 

 

Company Profile

 

TLWERK, established by the R&D, production and sales team with more than 10 years of technical experience, is a professional trade company.

We focus on the R&D, technology and sales services of induction motors and motor power source systems, especially for the customized development of products according to the specific application requirements of customers.

The products are produced and tested by our professional motor manufacturers and related motor system manufacturers in the partnership.

The developed three-phase asynchronous motor series are: YS/MS, YL/ML, YE3, YE4, YEJ, YVP and permanent magnet motors.

Our products have got a good domestic market and a good fame in more than 30 provinces and cities in China, and now gradually expand the international market.

We have our own experienced R&D team, modern production lines and high-precision testing equipment. The manufacturer strictly implements the ISO9001-2015 quality management system, and all products have been inspected, and have obtained national CCC certification and international CE certification, as well as other relevant international certifications. Our motor products are widely used in different fields such as reducers, hydraulic equipment, lifting equipment, fans, wind power, home appliances, food, clothing, papermaking, packaging, ceramics, printing, chemical industry, animal husbandry machinery, woodworking machinery, agriculture and water conservancy.

Production & Workshop

We adhere to the business philosophy of “Life, based on quality; Trust, based on honesty; Win-win cooperation”, and insists on giving back to all customers with high-quality products and comprehensive services!

Certifications

Packaging & Shipping

FAQ

1.How about your MOQ and lead time?
Both MOQ and lead time depends on specific products. Generally speaking, it cost 10-30 days.

2.Can I get sample?
Yes. We offer sample motor.

3.Is customized service available?
OEM & ODM both are available. Please inform us with output power, speed rpm, output torque, using voltage and application range.

4. What is your payment term?
30% T/T in advance, 70% balance before shipment
30% T/T in advance, 70% balance 30 days after BL date by ocean, 15 days after AWB date by air, after a long-term stable cooperation.

5. What about warranty?
One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.

6.Why us?
* Professional factory for Electric Motor in China
*Safety / Energy Consumption / Superior Life
* Full of export experiences.
* 100% tested before delivery
* A complete set of motor solutions can be provided.
* Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.
* CE/ISO Approved
 

Before Sale After Sale
1 Sample Confirmation 1 Comprehensive service with separate after-sale team
Providing information consulting and technical guidance. 2 Satisfied solution while any problem identified.
3 Packaging can be customized. 3 Exclusive and unique solution provided by professional engineers.
4 Reply to your enquiry in 24 working hours. 4 New craft, new technology and other related advisory services.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal
Speed: Constant Speed
Number of Stator: Single-Phase and Three-Phase
Function: Driving, Control, Driving, Control
Casing Protection: Customized
Number of Poles: 2-12
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China manufacturer Hot Selling 4kw 8.3A 1500r/Min Synchronous Motor AC 3 Phase Electric Motor   vacuum pump engine	China manufacturer Hot Selling 4kw 8.3A 1500r/Min Synchronous Motor AC 3 Phase Electric Motor   vacuum pump engine
editor by CX 2024-05-08

China Good quality 0.75kw 1.6A 3000r/Min AC Motor Permanent Magnet Synchronous Motor 3 Phase Electric Motor vacuum pump distributors

Product Description

Product Description

Three-Phase Motor is an electric motor driven by a three-phase AC power source.
They are widely used as power sources for industrial equipment and machinery. Also called three-phase induction motors (induction motors), they are generally powered by a three-phase AC power supply of 200 V, 110V, 380V and so on.
Three-Phase Motors consist of a stator, rotor, output shaft, flange bracket, and ball bearings.

YS (MS), YE3, Y4 Motor Series

YS (MS), YE3, YE4 series three-phase asynchronous motors with Aluminum housing adopted the newest design and high quality material.lt is conformity with the IEC 34-1 standards. The efficiency of the motors can meet EFF2 and EFF1 if requested. That good features: perfect performance low noises light vibration, reliable running, good appearance, small volume and light weight.

YEJ Brake Motor Series

Brake motor is made of 2 parts: three-phase asynchronous motors and brake, it belongs to three-phase-asynchronous motor derived series. Manual brake release and bolt release are 2 forms of brake. Brake is the main components of the brake motor. Its working power divided into 2 categories: One is AC braking, the other is DC braking.  Our company produces brake motors are DC brake motors, the advantage of the braking torque is below, easy installation, braking response speed, high reliability, versatility and other advantages.

To the Ac power to the brake coil is provided with suction cups for low voltage winding rated DC voltage. A single-phase AC power is rectified then supply to a sucker winding to make it work so the brake motor terminal box fitted with a rectifier, wiring diagram below.Brake motor braking time (t) is the time from the motor and brake stopping the power to the shaft completely stopped, under normal circumstances, for 63 to 880 frame size motor, the braking time is 0.5 seconds. For o-132 frame size motor the braking time is 1 second, For 160 to180 frame size motor, the braking time is 2 seconds.

YVP Frequency Conversion Motor Series

YVP speed has become the popular way, can be widely used in various industries continuously variable transmission.
In the variable frequency motor speed control system, using power electronic inverter as a power supply is inevitable that there will be high harmonics, harmonic greater impact on the motor. Mainly reflected in the magnetic circuit and the circuit harmonic magnetic potential harmonic currents. Different amplitudes and frequencies of harmonic currents and magnetic flux will cause the motor stator copper loss rotor aluminum consumption. These losses of the motor efficiency and power factor reduction, the majority of these losses into heat, causing additional heating of the motor, causing the motor temperature increases, the increase in temperature generally 10~20%. As a result of electromagnetic interference power, conduction and radiation, the stator winding insulation aging, resulting in deterioration of the common-mode voltage and leakage current of accelerated beaning, bearing perishable, while the motor screaming. Since harmonic electromagnetic torque constant harmonic electromagnetic torque and vibration harmonic MMFs and rear rotor harmonic current synthesis. The torque of the motor torque will generate pulsating issued, so that the motor speed vibration is low.
Our produce YS, IE2, IE3, IE4 Series Universal three-phase asynchronous motor design, our main consideration is the motor overload, starting performance, efficiency and power factor. Another major consideration for non-sinusoidal motor power adaptability. Suppose the influence of higher harmonic current to the motor. Since the motor is increased when the working
Temperature of the low-frequency region, class F insulation dl ass above, the use of polymer insulation materials and vacuum pressure impregnation process, and the use of special insulation structure. Ln order to reduce the electromagnetic torque ripple, improve the precision mechanical parts to improve the quality level constant. high-precision bearing mute. n order to eliminate vibration motor, the motor structure to strengthen the overall design.

Operating conditions:

Ambient temperature: -15ºC<0<40ºC Duty:  S1 (continuous)
Altitude: not exceed1000m Insulation class:  B/F/H
Rated voltage: 380V, 220V-760Vis available Protection class: lP54/IP55
Rated frequency: 50HZ/60HZ Cooling method:  IC0141

Production Flow

Product Overall & Installation Dimensions:

YS/MS Series:

 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 135 215 285
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 206 206 150 250 376
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 222 228 170 285 400
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 460
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 500
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 615
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 675
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 700
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 740

YE3, YE4 Series:
 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 145 215 305
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 360
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 385
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 270 206 175 250 445
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 270 228 190 285 455
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 475
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 570
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 655
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 685
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 705
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 745

YEJ B3 Series H63-180:
 

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 Φ7 135 120×120 167 255
71 112 90 45 Φ14 30 5 16 71 Φ7 137 130×130 178 305
80M 125 100 50 Φ19 40 6 21.5 80 Φ10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
90L 140 125 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 Φ12 200 185×185 240 440
112M 190 140 70 Φ28 60 8 31 112 Φ12 230 200×200 270 480
132S 216 140 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
132M 216 178 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
160M 254 210 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
160L 254 254 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
180M 279 241 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880

YEJ B5 Series H63-180:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 255
71 Φ14 30 5 16 130 110 160 10 3 130×130 107 305
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 440
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 480
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
160M Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
160L Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
180M Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880
180L Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880

YEJ B14 Series H63-112:
 

Frame size  Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 255
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 305
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 440
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 480

YVP B3 Series H63-180:

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 7 135 120×120 167 260
71 112 90 45 Φ14 30 5 16 71 7 137 130×130 178 295
80 125 100 50 Φ19 40 6 21.5 80 10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 10 175 160×160 205 390
90L 140 125 56 Φ24 50 8 27 90 10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 12 200 185×185 240 430
112M 190 140 70 Φ28 60 8 31 112 12 230 200×200 270 460
132S 216 140 89 Φ38 80 10 41 132 12 270 245×245 315 525
132M 216 178 89 Φ38 80 10 41 132 12 270 245×245 315 525
160M 254 210 108 Φ42 110 12 45 160 14.5 320 335×335 450 850
160L 254 254 108 Φ42 110 12 45 160 14.5 320 335×335 450 870
180M 279 241 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 980

YVP B5 Series H63-180:
 

C Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 260
71 Φ14 30 5 16 130 110 160 10 3.5 130×130 107 295
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 390
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 430
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 460
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 525
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 252
160M Φ42 110 12 45 300 250 350 18.5 5 335×335 290 850
160L Φ42 110 12 45 300 250 350 18.5 5 335×335 290 870
180M Φ48 110 14 51.5 300 250 350 18.5 5 370×370 340 880
180L Φ48 110 14 51.5 300 250 350 18.4 5 370×370 340 980

YVP B14 Series H63-112:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 260
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 295
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 390
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 430
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 460

 

Product Parameters

YS/MS Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE2) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YS-5612 0.09  1/8 2680 62.0 0.68 0.32 0.307 2.3 2.3 6.0
YS-5622 0.12  1/6 2660 67.0 0.71 0.38 0.410 2.3 2.3 6.0
YS-6312 0.18  1/4 2710 69.0 0.75 0.53 0.614 2.3 2.3 6.0
YS-6322 0.25  1/3 2730 72.0 0.78 0.68 0.853 2.3 2.3 6.0
YS-7112 0.37  1/2 2760 73.5 0.80 0.96 1.260 2.3 2.3 6.0
YS-7122 0.55  3/4 2770 75.5 0.82 1.35 1.880 2.3 2.3 6.0
YS-8012 0.75 1.0 2770 76.5 0.85 1.75 2.560 2.2 2.3 6.0
YS-8571 1.10 1.5 2800 77.0 0.85 2.55 3.750 2.2 2.3 7.0
YS-90S-2 1.50 2.0 2840 78.5 0.85 3.42 5.040 2.2 2.3 7.0
YS-90L-2 2.20 3.0 2840 81.0 0.86 4.80 7.400 2.2 2.3 7.0
YS-100L-2 3.00 4.0 2890 84.6 0.87 6.17 9.910 2.2 2.3 7.8
YS-5614 0.06 1/12 1320 56.0 0.58 0.28 0.410 2.4 2.4 6.0
YS-5624 0.09  1/8 1320 58.0 0.61 0.39 0.614 2.4 2.4 6.0
YS-6314 0.12  1/6 1350 60.0 0.63 0.48 0.819 2.4 2.4 6.0
YS-6324 0.18  1/4 1350 64.0 0.66 0.65 1.230 2.4 2.4 6.0
YS-7114 0.25  1/3 1350 67.0 0.68 0.83 1.710 2.4 2.4 6.0
YS-7124 0.37  1/2 1350 69.5 0.72 1.12 2.520 2.4 2.4 6.0
YS-8014 0.55  3/4 1380 73.5 0.73 1.56 3.750 2.4 2.4 6.0
YS-8571 0.75 1.0 1390 75.5 0.75 2.01 5.120 2.3 2.4 6.5
YS-90S-4 1.10 1.5 1400 78.0 0.78 2.75 7.400 2.3 2.4 6.5
YS-90L-4 1.50 2.0 1400 79.0 0.79 3.65 10.100 2.3 2.4 6.5
YS-100L1-4 2.20 3.0 1440 84.3 0.81 4.90 14.600 2.3 2.3 7.6
YS-100L2-4 3.00 4.0 1440 85.5 0.82 6.50 19.900 2.3 2.3 7.6
YS-7116 0.18 1/4 910 59.0 0.61 0.76 1.890 2.0 2.0 5.5
YS-7126 0.25 1/3 910 63.0 0.62 0.97 2.260 2.0 2.0 5.5
YS-8016 0.37 1/2 910 68.0 0.62 1.33 3.880 2.0 2.0 5.5
YS-8026 0.55 3/4 910 71.0 0.64 1.84 5.770 2.0 2.0 5.5
YS-90S-6 0.75 1.0 920 73.0 0.68 2.30 7.790 2.0 2.1 5.5
YS-90L-6 1.10 1.5 920 74.0 0.70 3.23 11.400 2.0 2.1 6.0
YS-100L-6 1.50 2.0 940 79.0 0.75 3.38 15.200 2.0 2.1 6.5
YS-711-8 0.09 0.12 600 40.0 0.57 0.60 1.950 1.8 1.9 2.8
YS-712-8 0.12 0.18 600 45.0 0.57 0.71 2.160 1.8 1.9 2.8
YS-801-8 0.18 0.25 645 51.0 0.61 0.88 2.490 1.8 2.0 3.3
YS-802-8 0.25 0.37 645 54.0 0.61 1.15 3.640 1.8 2.0 3.3
YS-90S-8 0.37 0.50 670 62.0 0.61 1.49 5.120 1.8 2.0 4.0
YS-90L-8 0.55 0.75 670 63.0 0.61 2.17 7.610 1.8 2.1 4.0

YE3 Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE3) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YE3-801-2 0.75 1.0 2880 80.7 0.82 1.72 2.49 2.3 2.3 7.0
YE3-802-2 1.10 1.5 2880 82.7 0.83 2.43 3.65 2.2 2.3 7.3
YE3-90S-2 1.50 2.0 2895 84.2 0.84 3.22 4.95 2.2 2.3 7.6
YE3-90L-2 2.20 3.0 2895 85.9 0.85 4.58 7.26 2.2 2.3 7.6
YE3-100L-2 3.00 4.0 2895 87.1 0.87 6.02 9.90 2.2 2.3 7.8
YE3-160L-2 18.50 25.0 2940 92.4 0.89 34.20 60.10 2.0 2.3 8.2
YE3-802-4 0.75 1.0 1420 82.5 0.75 1.84 5.04 2.3 2.3 6.6
YE3-90s-4 1.10 1.5 1445 84.1 0.76 2.61 7.27 2.3 2.3 6.8
YE3-90L-4 1.50 2.0 1445 85.3 0.77 3.47 9.91 2.3 2.3 7.0
YE3-100L1-4 2.20 3.0 1435 86.7 0.81 4.76 14.60 2.3 2.3 7.6
YE3-100L2-4 3.00 4.0 1435 87.7 0.82 6.34 20.00 2.3 2.3 7.6
YE3-112M-4 4.00 5.5 1440 88.6 0.82 8.37 26.50 2.2 2.3 7.8
YE3-132S-4 5.50 7.5 1460 89.6 0.83 11.20 36.00 2.0 2.3 7.9
YE3-132M-4 7.50 10.0 1460 90.4 0.84 15.00 49.10 2.0 2.3 7.5
YE3-160M-4 11.00 15.0 1465 91.4 0.85 21.50 71.70 2.2 2.3 7.7
YE3-160L-4 15.00 20.0 1465 92.1 0.86 28.80 97.80 2.2 2.3 7.8
YE3-180M-4 18.50 25.0 1470 92.6 0.86 35.30 120.20 2.0 2.3 7.8
YE3-180L-4 22.00 30.0 1470 93 0.86 41.80 142.90 2.0 2.3 7.8
YE3-90S-6 0.75 1.0 935 78.9 0.71 2.03 7.66 2.0 2.1 6.0
YE3-90L-6 1.10 1.5 945 81 0.73 2.83 11.10 2.0 2.1 6.0
YE3-100L-6 1.50 2.0 949 82.5 0.73 3.78 15.10 2.0 2.1 6.5
YE3-112M-6 2.20 3.0 955 84.3 0.74 5.36 22.00 2.0 2.1 6.6
YE3-132S-6 3.00 4.0 968 85.6 0.74 7.20 29.60 2.0 2.1 6.8
YE3-132M1-6 4.00 5.5 968 86.8 0.74 9.46 39.50 2.0 2.1 6.8
YE3-132M2-6 5.50 7.5 968 88 0.75 12.70 54.30 2.0 2.1 7.0
YE3-160M-6 7.50 10.0 970 89.1 0.79 16.20 73.80 2.0 2.1 7.0
YE3-160L-6 11.00 15.0 970 90.3 0.8 23.10 108.30 2.0 2.1 6.2
YE3-180L-6 18.50 20.0 975 91.2 0.81 30.90 146.90 2.0 2.1 7.3

YE4 Series:

  OUTPUT RATED CURRENT ROTATE SPEED EFFICIENCY POWER FOCTOR RATED TORQUE LOCKED ROTOR TORQUE LOCKED ROTOR CURRENT MAXIMUM TORQUE NOISE
TYPE RATED TORQUE RATED CURRENT RATED TORQUE
  kW A r/min Eff.%(IE4) P.F N.m Tst Ist Tmax dB(A)
  TN IN TN
SYNCHRO-SPEED 3000r/min
YE4-80M1-2 0.75 1.6 2895 83.5 0.83 2.47 2.2 8.5 2.3 62
YE4-80M2-2 1.1 2.4 2895 85.2 0.83 3.63 2.2 8.5 2.3 62
YE4-90S-2 1.5 3.1 2880 86.5 0.85 4.97 2.2 9.0 2.3 67
YE4-90L-2 2.2 4.4 2880 88.0 0.86 7.30 2.2 9.0 2.3 67
YE4-100L-2 3 5.9 2905 89.1 0.87 9.86 2.2 9.5 2.3 74
YE4-112M-2 4 7.7 2920 90.0 0.88 13.10 2.2 9.5 2.3 77
YE4-132S1-2 5.5 10.4 2945 90.0 0.88 17.80 2.0 9.5 2.3 79
YE4-132S2-2 7.5 14 2940 91.7 0.89 24.40 2.0 9.5 2.3 79
YE4-160M1-2 11 20.3 2965 92.6 0.89 35.40 2.0 9.5 2.3 81
YE4-160M2-2 15 27.5 2965 93.3 0.89 48.30 2.0 9.5 2.3 81
YE4-160L-2 18.5 33.7 2965 93.7 0.89 59.60 2.0 9.5 2.3 81
SYNCHRO-SPEED1500r/min
YE4-80M1-4 0.55 1.4 1440 83.9 0.74 3.65 2.4 6.6 2.3 56
YE4-80M2-4 0.75 1.8 1440 85.7 0.74 4.97 2.3 8.5 2.3 56
YE4-90S-4 1.1 2.6 1445 87.2 0.75 7.27 2.3 8.5 2.3 59
YE4-90L-4 1.5 3.4 1445 88.2 0.76 9.91 2.3 9.0 2.3 59
YE4-100L1-4 2.2 4.7 1450 89.5 0.79 14.50 2.3 9.0 2.3 64
YE4-100L2-4 3 6.3 1450 90.4 0.8 19.80 2.3 9.5 2.3 64
YE4-112M-4 4 8.3 1460 91.1 0.8 26.20 2.3 9.5 2.3 65
YE4-132S-4 5.5 11.4 1475 91.1 0.8 35.60 2.0 9.5 2.3 71
YE4-132M-4 7.5 15.2 1470 92.6 0.81 48.70 2.0 9.5 2.3 71
YE4-160M-4 11 21.6 1470 93.3 0.83 71.50 2.0 9.5 2.3 73
YE4-160L-4 15 28.9 1470 93.9 0.84 97.40 2.0 9.5 2.3 73
SYNCHRO-SPEED1000r/min
YE4-80M1-6 0.37 1.1 940 78.0 0.68 3.76 1.9 6.0 2.1 54
YE4-80M2-6 0.55 1.5 940 80.9 0.68 5.59 1.9 6.0 2.1 54
YE4-90S-6 0.75 2 950 82.7 0.7 7.54 2.1 7.5 2.1 57
YE4-90L-6 1.1 2.8 950 84.5 0.7 11.10 2.1 7.5 2.1 57
YE4-100L-6 1.5 3.7 960 85.9 0.71 14.90 2.1 7.5 2.1 61
YE4-112M-6 2.2 5.4 975 87.4 0.71 21.50 2.1 7.5 2.1 65
YE4-132S-6 3 7.2 985 88.6 0.71 29.10 2.0 7.5 2.1 69
YE4-132M1-6 4 9.4 985 89.5 0.72 38.80 2.0 8.0 2.1 69
YE4-132M2-6 5.5 12.8 980 90.5 0.72 53.60 2.0 8.0 2.1 69
YE4-160M-6 7.5 16.4 980 91.3 0.76 73.10 2.0 8.0 2.1 73
YE4-160L-6 11 23.5 980 92.3 0.77 107.00 2.0 8.5 2.1 73

YEJ 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 3.5 0.10
YEJ-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 3.5 0.10
YEJ-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 4.0 0.10
YEJ-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 4.0 0.10
YEJ-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 7.5 0.10
YEJ-802-2 1.10 2840 77.0 0.84 2.55 3.70 2.2 2.3 7.5 0.10
YEJ-90S-2 1.50 2840 79.0 0.84 3.39 5.04 2.2 2.3 15 0.15
YEJ-90L-2 2.20 2840 81.0 0.85 4.80 7.40 2.2 2.3 15 0.15
YEJ-100L1-2 3.00 2860 83.0 0.87 6.31 10.00 2.2 2.3 30 0.15
YEJ-100L2-2 4.00 2880 85.0 0.88 8.22 13.30 2.2 2.3 40 0.15
YEJ-112M-2 5.50 2910 86.0 0.88 11.2 18.00 2.2 2.3 80 0.15
YEJ-132S-2 7.00 2910 87.0 0.88 15.1 24.60 2.2 2.3 80 0.15
YEJ-132M-2 11.00 2930 88.0 0.89 21.3 35.90 2.2 2.3 150 0.30
YEJ-160M-2 15.00 2930 89.0 0.89 28.8 48.90 2.2 2.2 150 0.30
YEJ-160L-2 18.50 2935 90.0 0.90 34.7 60.20 2.2 2.2 150 0.30
YEJ-180M-2 22.00 2935 90.0 0.90 41.3 71.60 2.2 2.2 200 0.30

YEJ 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 3.5 0.10
YEJ-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 3.5 0.10
YEJ-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 4.0 0.10
YEJ-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 4.0 0.10
YEJ-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 7.5 0.10
YEJ-802-4 0.75 1405 73.0 0.76 2.02 5.10 2.2 2.4 7.5 0.10
YEJ-90S-4 1.10 1445 75.0 0.77 2.82 7.27 2.2 2.3 15 0.15
YEJ-90L-4 1.50 1445 78.0 0.79 3.7 9.91 2.2 2.3 15 0.15
YEJ-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 30 0.15
YEJ-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 30 0.15
YEJ-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 40 0.15
YEJ-132S-4 5.50 1440 85.0 0.83 11.7 36.50 2.2 2.3 80 0.15
YEJ-132M-4 7.50 1440 87.0 0.84 15.6 49.70 2.2 2.3 80 0.15
YEJ-160M-4 11.00 1450 88.0 0.85 21.3 72.40 2.2 2.2 150 0.30
YEJ-160L-4 15.00 1450 89.0 0.85 30.1 98.80 2.2 2.2 150 0.30
YEJ-180M-4 18.50 1455 90.5 0.86 36.5 121.40 2.2 2.2 150 0.30
YEJ-180L-4 22.00 1455 91.0 0.86 43.1 144.40 2.0 2.2 200 0.30

YEJ 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-711-6 0.18 900 56.0 0.66 0.71 19.10 1.9 2.0 4.0 0.10
YEJ-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 4.0 0.10
YEJ-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 7.5 0.10
YEJ-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 7.5 0.10
YEJ-90S-6 0.75 930 69.0 0.72 2.26 7.70 2.1 2.1 15 0.15
YEJ-90L-6 1.10 940 72.0 0.73 3.14 11.20 2.1 2.1 15 0.15
YEJ-100L-6 1.50 940 76.0 0.76 3.95 15.20 2.2 2.1 30 0.15
YEJ-112M-6 2.20 96o 79.0 0.76 5.57 21.90 2.2 2.1 40 0.15
YEJ-132S-6 3.00 960 81.0 0.76 7.40 29.80 2.2 2.1 80 0.15
YEJ-132M1-6 4.00 960 82.0 0.76 9.63 39.80 2.2 2.1 80 0.15
YEJ-132M2-6 5.50 960 84.0 0.77 12.90 54.70 2.2 2.1 150 0.30
YEJ-160M-6 7.50 970 86.0 0.77 17.00 73.80 1.8 2.1 150 0.30
YEJ-160L-6 11.00 970 87.5 0.78 24.30 108.30 1.9 2.1 150 0.30
YEJ-180L-6 15.00 970 89.0 0.81 31.60 147.70 2.1 2.1 200 0.30

YVP 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 380 220 2800
YVP-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 380 220 2800
YVP-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 380 220 2800
YVP-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 380 220 2800
YVP-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 380 220 2800
YVP-802-2 1.10 2840 77.0 0.85 2.55 3.70 2.2 2.3 380 220 2800
YVP-90S-2 1.50 2840 79.0 0.85 3.39 5.04 2.2 2.3 380 220 2800
YVP-90L-2 2.20 2840 81.0 0.86 4.80 7.40 2.2 2.3 380 220 2800
YVP-100L-2 3.00 2860 83.0 0.87 6.31 10.0 2.2 2.3 380 220 2800
YVP-112M-2 4.00 2880 84.0 0.88 8.22 13.3 2.2 2.3 380 220 2800
YVP-132S1-2 5.50 2910 85.0 0.88 11.2 18.0 2.2 2.3 380 220 2800
YVP-132S2-2 7.50 2910 86.0 0.88 15.1 24.6 2.2 2.3 380 220 2800
YVP-160M1-2 11.0 2930 88.0 0.89 21.3 35.9 2.2 2.3 380 220 2800
YVP-160M2-2 15.0 2930 89.0 0.89 28.8 48.9 2.2 2.3 380 220 2800
YVP-160L-2 18.5 2935 90.0 0.90 34.7 60.2 2.2 2.3 380 220 2800
YVP-180M-2 22.0 2935 90.0 0.90 41.3 71.6 2.0 2.3 380 220 2800

YVP 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 380 220 2800
YVP-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 380 220 2800
YVP-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 380 220 2800
YVP-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 380 220 2800
YVP-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 380 220 2800
YVP-802-4 0.75 1405 73.0 0.77 2.02 5.10 2.2 2.4 380 220 2800
YVP-90S-4 1.10 1445 75.0 0.79 2.82 7.27 2.2 2.3 380 220 2800
YVP-90L-4 1.50 1445 78.0 0.79 3.70 9.91 2.2 2.3 380 220 2800
YVP-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 380 220 2800
YVP-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 380 220 2800
YVP-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 380 220 2800
YVP-132S-4 5.50 1440 85.0 0.84 11.70 36.50 2.2 2.3 380 220 2800
YVP-132M-4 7.50 1440 87.0 0.84 15.60 49.70 2.2 2.3 380 220 2800
YVP-160M-4 11.0 1450 88.0 0.85 21.30 72.40 2.2 2.2 380 220 2800
YVP-160L-4 15.0 1450 89.0 0.85 30.10 98.80 2.2 2.2 380 220 2800
YVP-180M-4 18.5 1455 90.5 0.86 36.50 121.40 2.2 2.2 380 220 2800
YVP-180L-4 22.0 1455 91.0 0.86 43.10 144.40 2.0 2.2 380 220 2800

YVP 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-711-6 0.18 900 58.0 0.66 0.71 1.91 1.9 2.0 380 220 2800
YVP-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 380 220 2800
YVP-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 380 220 2800
YVP-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 380 220 2800
YVP-90S-6 0.75 930 70.0 0.72 2.26 7.70 2.1 2.1 380 220 2800
YVP-90L-6 1.10 940 73.0 0.73 3.14 11.2 2.1 2.1 380 220 2800
YVP-100L-6 1.50 940 76.0 0.76 3.95 15.2 2.2 2.1 380 220 2800
YVP-112M-6 2.20 960 79.0 0.76 5.57 21.9 2.2 2.1 380 220 2800
YVP-132S-6 3.00 960 81.0 0.76 7.40 29.8 2.2 2.1 380 220 2800
YVP-132M1-6 4.00 960 83.0 0.76 9.63 39.8 2.2 2.1 380 220 2800
YVP-132M2-6 5.50 960 84.0 0.77 12.9 54.7 2.2 2.1 380 220 2800
YVP-160M-6 7.50 970 86.0 0.78 17.0 73.8 1.8 2.1 380 220 2800
YVP-160L-6 11.0 970 87.0 0.79 24.3 108.3 1.9 2.1 380 220 2800
YVP-180L-6 15.0 970 89.0 0.81 31.6 147.7 2.1 2.1 380 220 2800

 

 

Company Profile

 

TLWERK, established by the R&D, production and sales team with more than 10 years of technical experience, is a professional trade company.

We focus on the R&D, technology and sales services of induction motors and motor power source systems, especially for the customized development of products according to the specific application requirements of customers.

The products are produced and tested by our professional motor manufacturers and related motor system manufacturers in the partnership.

The developed three-phase asynchronous motor series are: YS/MS, YL/ML, YE3, YE4, YEJ, YVP and permanent magnet motors.

Our products have got a good domestic market and a good fame in more than 30 provinces and cities in China, and now gradually expand the international market.

We have our own experienced R&D team, modern production lines and high-precision testing equipment. The manufacturer strictly implements the ISO9001-2015 quality management system, and all products have been inspected, and have obtained national CCC certification and international CE certification, as well as other relevant international certifications. Our motor products are widely used in different fields such as reducers, hydraulic equipment, lifting equipment, fans, wind power, home appliances, food, clothing, papermaking, packaging, ceramics, printing, chemical industry, animal husbandry machinery, woodworking machinery, agriculture and water conservancy.

Production & Workshop

We adhere to the business philosophy of “Life, based on quality; Trust, based on honesty; Win-win cooperation”, and insists on giving back to all customers with high-quality products and comprehensive services!

Certifications

Packaging & Shipping

FAQ

1.How about your MOQ and lead time?
Both MOQ and lead time depends on specific products. Generally speaking, it cost 10-30 days.

2.Can I get sample?
Yes. We offer sample motor.

3.Is customized service available?
OEM & ODM both are available. Please inform us with output power, speed rpm, output torque, using voltage and application range.

4. What is your payment term?
30% T/T in advance, 70% balance before shipment
30% T/T in advance, 70% balance 30 days after BL date by ocean, 15 days after AWB date by air, after a long-term stable cooperation.

5. What about warranty?
One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.

6.Why us?
* Professional factory for Electric Motor in China
*Safety / Energy Consumption / Superior Life
* Full of export experiences.
* 100% tested before delivery
* A complete set of motor solutions can be provided.
* Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.
* CE/ISO Approved
 

Before Sale After Sale
1 Sample Confirmation 1 Comprehensive service with separate after-sale team
Providing information consulting and technical guidance. 2 Satisfied solution while any problem identified.
3 Packaging can be customized. 3 Exclusive and unique solution provided by professional engineers.
4 Reply to your enquiry in 24 working hours. 4 New craft, new technology and other related advisory services.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal
Speed: Constant Speed
Number of Stator: Single-Phase and Three-Phase
Function: Driving, Control, Driving, Control
Casing Protection: Customized
Number of Poles: 2-12
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China Good quality 0.75kw 1.6A 3000r/Min AC Motor Permanent Magnet Synchronous Motor 3 Phase Electric Motor   vacuum pump distributorsChina Good quality 0.75kw 1.6A 3000r/Min AC Motor Permanent Magnet Synchronous Motor 3 Phase Electric Motor   vacuum pump distributors
editor by CX 2024-05-03

China high quality 0.37kw 0.5HP AC Motor Permanent Magnet Synchronous Motor 3 Phase Electric Motor manufacturer

Product Description

Product Description

Three-Phase Motor is an electric motor driven by a three-phase AC power source.
They are widely used as power sources for industrial equipment and machinery. Also called three-phase induction motors (induction motors), they are generally powered by a three-phase AC power supply of 200 V, 110V, 380V and so on.
Three-Phase Motors consist of a stator, rotor, output shaft, flange bracket, and ball bearings.

YS (MS), YE3, Y4 Motor Series

YS (MS), YE3, YE4 series three-phase asynchronous motors with Aluminum housing adopted the newest design and high quality material.lt is conformity with the IEC 34-1 standards. The efficiency of the motors can meet EFF2 and EFF1 if requested. That good features: perfect performance low noises light vibration, reliable running, good appearance, small volume and light weight.

YEJ Brake Motor Series

Brake motor is made of 2 parts: three-phase asynchronous motors and brake, it belongs to three-phase-asynchronous motor derived series. Manual brake release and bolt release are 2 forms of brake. Brake is the main components of the brake motor. Its working power divided into 2 categories: One is AC braking, the other is DC braking.  Our company produces brake motors are DC brake motors, the advantage of the braking torque is below, easy installation, braking response speed, high reliability, versatility and other advantages.

To the Ac power to the brake coil is provided with suction cups for low voltage winding rated DC voltage. A single-phase AC power is rectified then supply to a sucker winding to make it work so the brake motor terminal box fitted with a rectifier, wiring diagram below.Brake motor braking time (t) is the time from the motor and brake stopping the power to the shaft completely stopped, under normal circumstances, for 63 to 880 frame size motor, the braking time is 0.5 seconds. For o-132 frame size motor the braking time is 1 second, For 160 to180 frame size motor, the braking time is 2 seconds.

YVP Frequency Conversion Motor Series

YVP speed has become the popular way, can be widely used in various industries continuously variable transmission.
In the variable frequency motor speed control system, using power electronic inverter as a power supply is inevitable that there will be high harmonics, harmonic greater impact on the motor. Mainly reflected in the magnetic circuit and the circuit harmonic magnetic potential harmonic currents. Different amplitudes and frequencies of harmonic currents and magnetic flux will cause the motor stator copper loss rotor aluminum consumption. These losses of the motor efficiency and power factor reduction, the majority of these losses into heat, causing additional heating of the motor, causing the motor temperature increases, the increase in temperature generally 10~20%. As a result of electromagnetic interference power, conduction and radiation, the stator winding insulation aging, resulting in deterioration of the common-mode voltage and leakage current of accelerated beaning, bearing perishable, while the motor screaming. Since harmonic electromagnetic torque constant harmonic electromagnetic torque and vibration harmonic MMFs and rear rotor harmonic current synthesis. The torque of the motor torque will generate pulsating issued, so that the motor speed vibration is low.
Our produce YS, IE2, IE3, IE4 Series Universal three-phase asynchronous motor design, our main consideration is the motor overload, starting performance, efficiency and power factor. Another major consideration for non-sinusoidal motor power adaptability. Suppose the influence of higher harmonic current to the motor. Since the motor is increased when the working
Temperature of the low-frequency region, class F insulation dl ass above, the use of polymer insulation materials and vacuum pressure impregnation process, and the use of special insulation structure. Ln order to reduce the electromagnetic torque ripple, improve the precision mechanical parts to improve the quality level constant. high-precision bearing mute. n order to eliminate vibration motor, the motor structure to strengthen the overall design.

Operating conditions:

Ambient temperature: -15ºC<0<40ºC Duty:  S1 (continuous)
Altitude: not exceed1000m Insulation class:  B/F/H
Rated voltage: 380V, 220V-760Vis available Protection class: lP54/IP55
Rated frequency: 50HZ/60HZ Cooling method:  IC0141

Production Flow

Product Overall & Installation Dimensions:

YS/MS Series:

 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 135 215 285
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 206 206 150 250 376
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 222 228 170 285 400
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 460
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 500
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 615
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 675
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 700
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 740

YE3, YE4 Series:
 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 145 215 305
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 360
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 385
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 270 206 175 250 445
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 270 228 190 285 455
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 475
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 570
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 655
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 685
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 705
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 745

YEJ B3 Series H63-180:
 

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 Φ7 135 120×120 167 255
71 112 90 45 Φ14 30 5 16 71 Φ7 137 130×130 178 305
80M 125 100 50 Φ19 40 6 21.5 80 Φ10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
90L 140 125 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 Φ12 200 185×185 240 440
112M 190 140 70 Φ28 60 8 31 112 Φ12 230 200×200 270 480
132S 216 140 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
132M 216 178 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
160M 254 210 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
160L 254 254 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
180M 279 241 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880

YEJ B5 Series H63-180:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 255
71 Φ14 30 5 16 130 110 160 10 3 130×130 107 305
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 440
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 480
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
160M Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
160L Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
180M Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880
180L Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880

YEJ B14 Series H63-112:
 

Frame size  Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 255
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 305
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 440
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 480

YVP B3 Series H63-180:

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 7 135 120×120 167 260
71 112 90 45 Φ14 30 5 16 71 7 137 130×130 178 295
80 125 100 50 Φ19 40 6 21.5 80 10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 10 175 160×160 205 390
90L 140 125 56 Φ24 50 8 27 90 10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 12 200 185×185 240 430
112M 190 140 70 Φ28 60 8 31 112 12 230 200×200 270 460
132S 216 140 89 Φ38 80 10 41 132 12 270 245×245 315 525
132M 216 178 89 Φ38 80 10 41 132 12 270 245×245 315 525
160M 254 210 108 Φ42 110 12 45 160 14.5 320 335×335 450 850
160L 254 254 108 Φ42 110 12 45 160 14.5 320 335×335 450 870
180M 279 241 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 980

YVP B5 Series H63-180:
 

C Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 260
71 Φ14 30 5 16 130 110 160 10 3.5 130×130 107 295
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 390
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 430
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 460
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 525
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 252
160M Φ42 110 12 45 300 250 350 18.5 5 335×335 290 850
160L Φ42 110 12 45 300 250 350 18.5 5 335×335 290 870
180M Φ48 110 14 51.5 300 250 350 18.5 5 370×370 340 880
180L Φ48 110 14 51.5 300 250 350 18.4 5 370×370 340 980

YVP B14 Series H63-112:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 260
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 295
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 390
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 430
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 460

 

Product Parameters

YS/MS Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE2) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YS-5612 0.09  1/8 2680 62.0 0.68 0.32 0.307 2.3 2.3 6.0
YS-5622 0.12  1/6 2660 67.0 0.71 0.38 0.410 2.3 2.3 6.0
YS-6312 0.18  1/4 2710 69.0 0.75 0.53 0.614 2.3 2.3 6.0
YS-6322 0.25  1/3 2730 72.0 0.78 0.68 0.853 2.3 2.3 6.0
YS-7112 0.37  1/2 2760 73.5 0.80 0.96 1.260 2.3 2.3 6.0
YS-7122 0.55  3/4 2770 75.5 0.82 1.35 1.880 2.3 2.3 6.0
YS-8012 0.75 1.0 2770 76.5 0.85 1.75 2.560 2.2 2.3 6.0
YS-8571 1.10 1.5 2800 77.0 0.85 2.55 3.750 2.2 2.3 7.0
YS-90S-2 1.50 2.0 2840 78.5 0.85 3.42 5.040 2.2 2.3 7.0
YS-90L-2 2.20 3.0 2840 81.0 0.86 4.80 7.400 2.2 2.3 7.0
YS-100L-2 3.00 4.0 2890 84.6 0.87 6.17 9.910 2.2 2.3 7.8
YS-5614 0.06 1/12 1320 56.0 0.58 0.28 0.410 2.4 2.4 6.0
YS-5624 0.09  1/8 1320 58.0 0.61 0.39 0.614 2.4 2.4 6.0
YS-6314 0.12  1/6 1350 60.0 0.63 0.48 0.819 2.4 2.4 6.0
YS-6324 0.18  1/4 1350 64.0 0.66 0.65 1.230 2.4 2.4 6.0
YS-7114 0.25  1/3 1350 67.0 0.68 0.83 1.710 2.4 2.4 6.0
YS-7124 0.37  1/2 1350 69.5 0.72 1.12 2.520 2.4 2.4 6.0
YS-8014 0.55  3/4 1380 73.5 0.73 1.56 3.750 2.4 2.4 6.0
YS-8571 0.75 1.0 1390 75.5 0.75 2.01 5.120 2.3 2.4 6.5
YS-90S-4 1.10 1.5 1400 78.0 0.78 2.75 7.400 2.3 2.4 6.5
YS-90L-4 1.50 2.0 1400 79.0 0.79 3.65 10.100 2.3 2.4 6.5
YS-100L1-4 2.20 3.0 1440 84.3 0.81 4.90 14.600 2.3 2.3 7.6
YS-100L2-4 3.00 4.0 1440 85.5 0.82 6.50 19.900 2.3 2.3 7.6
YS-7116 0.18 1/4 910 59.0 0.61 0.76 1.890 2.0 2.0 5.5
YS-7126 0.25 1/3 910 63.0 0.62 0.97 2.260 2.0 2.0 5.5
YS-8016 0.37 1/2 910 68.0 0.62 1.33 3.880 2.0 2.0 5.5
YS-8026 0.55 3/4 910 71.0 0.64 1.84 5.770 2.0 2.0 5.5
YS-90S-6 0.75 1.0 920 73.0 0.68 2.30 7.790 2.0 2.1 5.5
YS-90L-6 1.10 1.5 920 74.0 0.70 3.23 11.400 2.0 2.1 6.0
YS-100L-6 1.50 2.0 940 79.0 0.75 3.38 15.200 2.0 2.1 6.5
YS-711-8 0.09 0.12 600 40.0 0.57 0.60 1.950 1.8 1.9 2.8
YS-712-8 0.12 0.18 600 45.0 0.57 0.71 2.160 1.8 1.9 2.8
YS-801-8 0.18 0.25 645 51.0 0.61 0.88 2.490 1.8 2.0 3.3
YS-802-8 0.25 0.37 645 54.0 0.61 1.15 3.640 1.8 2.0 3.3
YS-90S-8 0.37 0.50 670 62.0 0.61 1.49 5.120 1.8 2.0 4.0
YS-90L-8 0.55 0.75 670 63.0 0.61 2.17 7.610 1.8 2.1 4.0

YE3 Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE3) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YE3-801-2 0.75 1.0 2880 80.7 0.82 1.72 2.49 2.3 2.3 7.0
YE3-802-2 1.10 1.5 2880 82.7 0.83 2.43 3.65 2.2 2.3 7.3
YE3-90S-2 1.50 2.0 2895 84.2 0.84 3.22 4.95 2.2 2.3 7.6
YE3-90L-2 2.20 3.0 2895 85.9 0.85 4.58 7.26 2.2 2.3 7.6
YE3-100L-2 3.00 4.0 2895 87.1 0.87 6.02 9.90 2.2 2.3 7.8
YE3-160L-2 18.50 25.0 2940 92.4 0.89 34.20 60.10 2.0 2.3 8.2
YE3-802-4 0.75 1.0 1420 82.5 0.75 1.84 5.04 2.3 2.3 6.6
YE3-90s-4 1.10 1.5 1445 84.1 0.76 2.61 7.27 2.3 2.3 6.8
YE3-90L-4 1.50 2.0 1445 85.3 0.77 3.47 9.91 2.3 2.3 7.0
YE3-100L1-4 2.20 3.0 1435 86.7 0.81 4.76 14.60 2.3 2.3 7.6
YE3-100L2-4 3.00 4.0 1435 87.7 0.82 6.34 20.00 2.3 2.3 7.6
YE3-112M-4 4.00 5.5 1440 88.6 0.82 8.37 26.50 2.2 2.3 7.8
YE3-132S-4 5.50 7.5 1460 89.6 0.83 11.20 36.00 2.0 2.3 7.9
YE3-132M-4 7.50 10.0 1460 90.4 0.84 15.00 49.10 2.0 2.3 7.5
YE3-160M-4 11.00 15.0 1465 91.4 0.85 21.50 71.70 2.2 2.3 7.7
YE3-160L-4 15.00 20.0 1465 92.1 0.86 28.80 97.80 2.2 2.3 7.8
YE3-180M-4 18.50 25.0 1470 92.6 0.86 35.30 120.20 2.0 2.3 7.8
YE3-180L-4 22.00 30.0 1470 93 0.86 41.80 142.90 2.0 2.3 7.8
YE3-90S-6 0.75 1.0 935 78.9 0.71 2.03 7.66 2.0 2.1 6.0
YE3-90L-6 1.10 1.5 945 81 0.73 2.83 11.10 2.0 2.1 6.0
YE3-100L-6 1.50 2.0 949 82.5 0.73 3.78 15.10 2.0 2.1 6.5
YE3-112M-6 2.20 3.0 955 84.3 0.74 5.36 22.00 2.0 2.1 6.6
YE3-132S-6 3.00 4.0 968 85.6 0.74 7.20 29.60 2.0 2.1 6.8
YE3-132M1-6 4.00 5.5 968 86.8 0.74 9.46 39.50 2.0 2.1 6.8
YE3-132M2-6 5.50 7.5 968 88 0.75 12.70 54.30 2.0 2.1 7.0
YE3-160M-6 7.50 10.0 970 89.1 0.79 16.20 73.80 2.0 2.1 7.0
YE3-160L-6 11.00 15.0 970 90.3 0.8 23.10 108.30 2.0 2.1 6.2
YE3-180L-6 18.50 20.0 975 91.2 0.81 30.90 146.90 2.0 2.1 7.3

YE4 Series:

  OUTPUT RATED CURRENT ROTATE SPEED EFFICIENCY POWER FOCTOR RATED TORQUE LOCKED ROTOR TORQUE LOCKED ROTOR CURRENT MAXIMUM TORQUE NOISE
TYPE RATED TORQUE RATED CURRENT RATED TORQUE
  kW A r/min Eff.%(IE4) P.F N.m Tst Ist Tmax dB(A)
  TN IN TN
SYNCHRO-SPEED 3000r/min
YE4-80M1-2 0.75 1.6 2895 83.5 0.83 2.47 2.2 8.5 2.3 62
YE4-80M2-2 1.1 2.4 2895 85.2 0.83 3.63 2.2 8.5 2.3 62
YE4-90S-2 1.5 3.1 2880 86.5 0.85 4.97 2.2 9.0 2.3 67
YE4-90L-2 2.2 4.4 2880 88.0 0.86 7.30 2.2 9.0 2.3 67
YE4-100L-2 3 5.9 2905 89.1 0.87 9.86 2.2 9.5 2.3 74
YE4-112M-2 4 7.7 2920 90.0 0.88 13.10 2.2 9.5 2.3 77
YE4-132S1-2 5.5 10.4 2945 90.0 0.88 17.80 2.0 9.5 2.3 79
YE4-132S2-2 7.5 14 2940 91.7 0.89 24.40 2.0 9.5 2.3 79
YE4-160M1-2 11 20.3 2965 92.6 0.89 35.40 2.0 9.5 2.3 81
YE4-160M2-2 15 27.5 2965 93.3 0.89 48.30 2.0 9.5 2.3 81
YE4-160L-2 18.5 33.7 2965 93.7 0.89 59.60 2.0 9.5 2.3 81
SYNCHRO-SPEED1500r/min
YE4-80M1-4 0.55 1.4 1440 83.9 0.74 3.65 2.4 6.6 2.3 56
YE4-80M2-4 0.75 1.8 1440 85.7 0.74 4.97 2.3 8.5 2.3 56
YE4-90S-4 1.1 2.6 1445 87.2 0.75 7.27 2.3 8.5 2.3 59
YE4-90L-4 1.5 3.4 1445 88.2 0.76 9.91 2.3 9.0 2.3 59
YE4-100L1-4 2.2 4.7 1450 89.5 0.79 14.50 2.3 9.0 2.3 64
YE4-100L2-4 3 6.3 1450 90.4 0.8 19.80 2.3 9.5 2.3 64
YE4-112M-4 4 8.3 1460 91.1 0.8 26.20 2.3 9.5 2.3 65
YE4-132S-4 5.5 11.4 1475 91.1 0.8 35.60 2.0 9.5 2.3 71
YE4-132M-4 7.5 15.2 1470 92.6 0.81 48.70 2.0 9.5 2.3 71
YE4-160M-4 11 21.6 1470 93.3 0.83 71.50 2.0 9.5 2.3 73
YE4-160L-4 15 28.9 1470 93.9 0.84 97.40 2.0 9.5 2.3 73
SYNCHRO-SPEED1000r/min
YE4-80M1-6 0.37 1.1 940 78.0 0.68 3.76 1.9 6.0 2.1 54
YE4-80M2-6 0.55 1.5 940 80.9 0.68 5.59 1.9 6.0 2.1 54
YE4-90S-6 0.75 2 950 82.7 0.7 7.54 2.1 7.5 2.1 57
YE4-90L-6 1.1 2.8 950 84.5 0.7 11.10 2.1 7.5 2.1 57
YE4-100L-6 1.5 3.7 960 85.9 0.71 14.90 2.1 7.5 2.1 61
YE4-112M-6 2.2 5.4 975 87.4 0.71 21.50 2.1 7.5 2.1 65
YE4-132S-6 3 7.2 985 88.6 0.71 29.10 2.0 7.5 2.1 69
YE4-132M1-6 4 9.4 985 89.5 0.72 38.80 2.0 8.0 2.1 69
YE4-132M2-6 5.5 12.8 980 90.5 0.72 53.60 2.0 8.0 2.1 69
YE4-160M-6 7.5 16.4 980 91.3 0.76 73.10 2.0 8.0 2.1 73
YE4-160L-6 11 23.5 980 92.3 0.77 107.00 2.0 8.5 2.1 73

YEJ 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 3.5 0.10
YEJ-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 3.5 0.10
YEJ-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 4.0 0.10
YEJ-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 4.0 0.10
YEJ-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 7.5 0.10
YEJ-802-2 1.10 2840 77.0 0.84 2.55 3.70 2.2 2.3 7.5 0.10
YEJ-90S-2 1.50 2840 79.0 0.84 3.39 5.04 2.2 2.3 15 0.15
YEJ-90L-2 2.20 2840 81.0 0.85 4.80 7.40 2.2 2.3 15 0.15
YEJ-100L1-2 3.00 2860 83.0 0.87 6.31 10.00 2.2 2.3 30 0.15
YEJ-100L2-2 4.00 2880 85.0 0.88 8.22 13.30 2.2 2.3 40 0.15
YEJ-112M-2 5.50 2910 86.0 0.88 11.2 18.00 2.2 2.3 80 0.15
YEJ-132S-2 7.00 2910 87.0 0.88 15.1 24.60 2.2 2.3 80 0.15
YEJ-132M-2 11.00 2930 88.0 0.89 21.3 35.90 2.2 2.3 150 0.30
YEJ-160M-2 15.00 2930 89.0 0.89 28.8 48.90 2.2 2.2 150 0.30
YEJ-160L-2 18.50 2935 90.0 0.90 34.7 60.20 2.2 2.2 150 0.30
YEJ-180M-2 22.00 2935 90.0 0.90 41.3 71.60 2.2 2.2 200 0.30

YEJ 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 3.5 0.10
YEJ-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 3.5 0.10
YEJ-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 4.0 0.10
YEJ-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 4.0 0.10
YEJ-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 7.5 0.10
YEJ-802-4 0.75 1405 73.0 0.76 2.02 5.10 2.2 2.4 7.5 0.10
YEJ-90S-4 1.10 1445 75.0 0.77 2.82 7.27 2.2 2.3 15 0.15
YEJ-90L-4 1.50 1445 78.0 0.79 3.7 9.91 2.2 2.3 15 0.15
YEJ-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 30 0.15
YEJ-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 30 0.15
YEJ-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 40 0.15
YEJ-132S-4 5.50 1440 85.0 0.83 11.7 36.50 2.2 2.3 80 0.15
YEJ-132M-4 7.50 1440 87.0 0.84 15.6 49.70 2.2 2.3 80 0.15
YEJ-160M-4 11.00 1450 88.0 0.85 21.3 72.40 2.2 2.2 150 0.30
YEJ-160L-4 15.00 1450 89.0 0.85 30.1 98.80 2.2 2.2 150 0.30
YEJ-180M-4 18.50 1455 90.5 0.86 36.5 121.40 2.2 2.2 150 0.30
YEJ-180L-4 22.00 1455 91.0 0.86 43.1 144.40 2.0 2.2 200 0.30

YEJ 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-711-6 0.18 900 56.0 0.66 0.71 19.10 1.9 2.0 4.0 0.10
YEJ-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 4.0 0.10
YEJ-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 7.5 0.10
YEJ-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 7.5 0.10
YEJ-90S-6 0.75 930 69.0 0.72 2.26 7.70 2.1 2.1 15 0.15
YEJ-90L-6 1.10 940 72.0 0.73 3.14 11.20 2.1 2.1 15 0.15
YEJ-100L-6 1.50 940 76.0 0.76 3.95 15.20 2.2 2.1 30 0.15
YEJ-112M-6 2.20 96o 79.0 0.76 5.57 21.90 2.2 2.1 40 0.15
YEJ-132S-6 3.00 960 81.0 0.76 7.40 29.80 2.2 2.1 80 0.15
YEJ-132M1-6 4.00 960 82.0 0.76 9.63 39.80 2.2 2.1 80 0.15
YEJ-132M2-6 5.50 960 84.0 0.77 12.90 54.70 2.2 2.1 150 0.30
YEJ-160M-6 7.50 970 86.0 0.77 17.00 73.80 1.8 2.1 150 0.30
YEJ-160L-6 11.00 970 87.5 0.78 24.30 108.30 1.9 2.1 150 0.30
YEJ-180L-6 15.00 970 89.0 0.81 31.60 147.70 2.1 2.1 200 0.30

YVP 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 380 220 2800
YVP-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 380 220 2800
YVP-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 380 220 2800
YVP-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 380 220 2800
YVP-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 380 220 2800
YVP-802-2 1.10 2840 77.0 0.85 2.55 3.70 2.2 2.3 380 220 2800
YVP-90S-2 1.50 2840 79.0 0.85 3.39 5.04 2.2 2.3 380 220 2800
YVP-90L-2 2.20 2840 81.0 0.86 4.80 7.40 2.2 2.3 380 220 2800
YVP-100L-2 3.00 2860 83.0 0.87 6.31 10.0 2.2 2.3 380 220 2800
YVP-112M-2 4.00 2880 84.0 0.88 8.22 13.3 2.2 2.3 380 220 2800
YVP-132S1-2 5.50 2910 85.0 0.88 11.2 18.0 2.2 2.3 380 220 2800
YVP-132S2-2 7.50 2910 86.0 0.88 15.1 24.6 2.2 2.3 380 220 2800
YVP-160M1-2 11.0 2930 88.0 0.89 21.3 35.9 2.2 2.3 380 220 2800
YVP-160M2-2 15.0 2930 89.0 0.89 28.8 48.9 2.2 2.3 380 220 2800
YVP-160L-2 18.5 2935 90.0 0.90 34.7 60.2 2.2 2.3 380 220 2800
YVP-180M-2 22.0 2935 90.0 0.90 41.3 71.6 2.0 2.3 380 220 2800

YVP 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 380 220 2800
YVP-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 380 220 2800
YVP-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 380 220 2800
YVP-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 380 220 2800
YVP-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 380 220 2800
YVP-802-4 0.75 1405 73.0 0.77 2.02 5.10 2.2 2.4 380 220 2800
YVP-90S-4 1.10 1445 75.0 0.79 2.82 7.27 2.2 2.3 380 220 2800
YVP-90L-4 1.50 1445 78.0 0.79 3.70 9.91 2.2 2.3 380 220 2800
YVP-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 380 220 2800
YVP-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 380 220 2800
YVP-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 380 220 2800
YVP-132S-4 5.50 1440 85.0 0.84 11.70 36.50 2.2 2.3 380 220 2800
YVP-132M-4 7.50 1440 87.0 0.84 15.60 49.70 2.2 2.3 380 220 2800
YVP-160M-4 11.0 1450 88.0 0.85 21.30 72.40 2.2 2.2 380 220 2800
YVP-160L-4 15.0 1450 89.0 0.85 30.10 98.80 2.2 2.2 380 220 2800
YVP-180M-4 18.5 1455 90.5 0.86 36.50 121.40 2.2 2.2 380 220 2800
YVP-180L-4 22.0 1455 91.0 0.86 43.10 144.40 2.0 2.2 380 220 2800

YVP 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-711-6 0.18 900 58.0 0.66 0.71 1.91 1.9 2.0 380 220 2800
YVP-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 380 220 2800
YVP-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 380 220 2800
YVP-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 380 220 2800
YVP-90S-6 0.75 930 70.0 0.72 2.26 7.70 2.1 2.1 380 220 2800
YVP-90L-6 1.10 940 73.0 0.73 3.14 11.2 2.1 2.1 380 220 2800
YVP-100L-6 1.50 940 76.0 0.76 3.95 15.2 2.2 2.1 380 220 2800
YVP-112M-6 2.20 960 79.0 0.76 5.57 21.9 2.2 2.1 380 220 2800
YVP-132S-6 3.00 960 81.0 0.76 7.40 29.8 2.2 2.1 380 220 2800
YVP-132M1-6 4.00 960 83.0 0.76 9.63 39.8 2.2 2.1 380 220 2800
YVP-132M2-6 5.50 960 84.0 0.77 12.9 54.7 2.2 2.1 380 220 2800
YVP-160M-6 7.50 970 86.0 0.78 17.0 73.8 1.8 2.1 380 220 2800
YVP-160L-6 11.0 970 87.0 0.79 24.3 108.3 1.9 2.1 380 220 2800
YVP-180L-6 15.0 970 89.0 0.81 31.6 147.7 2.1 2.1 380 220 2800

 

 

Company Profile

 

TLWERK, established by the R&D, production and sales team with more than 10 years of technical experience, is a professional trade company.

We focus on the R&D, technology and sales services of induction motors and motor power source systems, especially for the customized development of products according to the specific application requirements of customers.

The products are produced and tested by our professional motor manufacturers and related motor system manufacturers in the partnership.

The developed three-phase asynchronous motor series are: YS/MS, YL/ML, YE3, YE4, YEJ, YVP and permanent magnet motors.

Our products have got a good domestic market and a good fame in more than 30 provinces and cities in China, and now gradually expand the international market.

We have our own experienced R&D team, modern production lines and high-precision testing equipment. The manufacturer strictly implements the ISO9001-2015 quality management system, and all products have been inspected, and have obtained national CCC certification and international CE certification, as well as other relevant international certifications. Our motor products are widely used in different fields such as reducers, hydraulic equipment, lifting equipment, fans, wind power, home appliances, food, clothing, papermaking, packaging, ceramics, printing, chemical industry, animal husbandry machinery, woodworking machinery, agriculture and water conservancy.

Production & Workshop

We adhere to the business philosophy of “Life, based on quality; Trust, based on honesty; Win-win cooperation”, and insists on giving back to all customers with high-quality products and comprehensive services!

Certifications

Packaging & Shipping

FAQ

1.How about your MOQ and lead time?
Both MOQ and lead time depends on specific products. Generally speaking, it cost 10-30 days.

2.Can I get sample?
Yes. We offer sample motor.

3.Is customized service available?
OEM & ODM both are available. Please inform us with output power, speed rpm, output torque, using voltage and application range.

4. What is your payment term?
30% T/T in advance, 70% balance before shipment
30% T/T in advance, 70% balance 30 days after BL date by ocean, 15 days after AWB date by air, after a long-term stable cooperation.

5. What about warranty?
One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.

6.Why us?
* Professional factory for Electric Motor in China
*Safety / Energy Consumption / Superior Life
* Full of export experiences.
* 100% tested before delivery
* A complete set of motor solutions can be provided.
* Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.
* CE/ISO Approved
 

Before Sale After Sale
1 Sample Confirmation 1 Comprehensive service with separate after-sale team
Providing information consulting and technical guidance. 2 Satisfied solution while any problem identified.
3 Packaging can be customized. 3 Exclusive and unique solution provided by professional engineers.
4 Reply to your enquiry in 24 working hours. 4 New craft, new technology and other related advisory services.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal
Speed: Constant Speed
Number of Stator: Single-Phase and Three-Phase
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

China high quality 0.37kw 0.5HP AC Motor Permanent Magnet Synchronous Motor 3 Phase Electric Motor   manufacturer China high quality 0.37kw 0.5HP AC Motor Permanent Magnet Synchronous Motor 3 Phase Electric Motor   manufacturer
editor by CX 2024-04-24

China Economic 2kw 3 phase middle inertia ac brushless servo motor driver with Tamagawa encoder ac motor

Guarantee: 1YEARS
Design Amount: SZGH-13200CC+SZGH-SD2026
Variety: SERVO MOTOR
Frequency: 50Hz
Period: One-section
Protect Characteristic: Water-proof
AC Voltage: 220V
Efficiency: IE 4
Rated Energy: 2kW
Constant Torque: 7.7N.M
Rated rotation velocity: 2500r/Min
Rated voltage: 220V
Encoder Resolution: 2500PPR
Matched Driver: SZGH-SD2026
Diameter of axle: 22mm
Software: Lathe and Turning Center
Certification: CE
Dimension(L*W*H): 192*one hundred thirty*a hundred thirty
Packaging Details: regular exporting packing

Financial 2kw 3 stage middle inertia ac brushless servo motor driver with Tamagawa encoder. SZGH-13200CC is 2KW ,7.7NM and 2500RPM servo motor, it is lower cost , and quite common-goal kind. Imported comments components, unique imported minimal-sound motor.There are 2 varieties kind servo driver, SZGH-SD2026,SZGH-301, that matching for 2KW servo motor.There is also 1 twin servo driver,SZGH-302,that can management 2 pcs of 2KW servo motors synchronously.

Packing record
SZGH-13200CC1 pcs
SZGH-SD20261 pcs
motor cables5 meter
encoder cables5 meter
Manual1 pcs
Note : if you want longer cables and absolute & brake motor, pls allow me know at first !!

  • Description of Driver
  • Enter Energy : Solitary Three Phase AC220V-15%~+ten% SO/60HZManage design : : Place Control one:Velocity Management 2: Torque Management 3:Situation/Speed Management4·PositionTorque Handle: 5:Speed Torque HandleProtecting Perform : Over-pace Above-voltage Underneath-voltage More than-present OverloadEncoder Mistake/Manage Electrical power Eror/ Situation Offset ErorDriver Load : Much less than 3times of rotor inertia Exhibit : 5 bits LED indicator exhibit 4 Work keysConversation : RS485Place Control : Input Design , Electric Ratio Merchandise Requirements Application Recommend Products Why Decide on Us FAQ one. Who are we?We are dependent in ZheJiang , China, start from 2013, which supplying cnc total solutions&Robotic arm, sell to Jap Europe(twenty.00%),Mid East(twenty.00%),Southeast Asia(fifteen.00%),Southern Europe(10.00%),South The united states(8.00%),North America(5.00%),Western Europe(5.00%),Eastern Asia(4.00%),Central The usa(4.00%),Northern Europe(4.00%),Africa(3.00%),Domestic Market(2.00%). two. How can we promise quality?Constantly finishing a pre complete screening by our professional engineersAlways last 100% Inspection just before cargothree.What can you purchase from us?CNC Controller/Servo Motor & Servo Driver/Spindle Servo Motor & Spindle Servo Push/Robot Armsfour. why must you acquire from us not from other suppliers?We can provide with ideal package remedy by CNC technique and motor, seventeen Inch 72V 3000W Electrical Bike Wheel Hub Motor Disc Brake 2.5CM Broad in Hub motorists CZPT has professional technical team,tailored design and style,substantial top quality promise,competitive quotation, CZPT and trustworthy enterprise is our tenet. Your fulfill is our biggest .five. what providers can we give?Accepted Shipping and delivery Phrases: FOB,CFR,CIF,EXW,FAS,CIP,FCA,DDP,DDU,DAF;Accepted Payment Forex:USD,EUR,CAD,HKD,CNYAccepted Payment Type: T/T,L/C,D/P D/A,Credit rating Card,PayPal,Western Union,Funds,EscrowLanguage Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean, personalized 7.4v 4000rpm dc electric brushless motor multi rotor aircraft mini brushless dc motor for plane helicopter Italian and so on.6.When can you get our buy? All goods will be created effectively within 5 to 7 workdays, other than the personalized products.

    What Is a Gear Motor?

    A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

    Inertial load

    Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
    The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
    Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
    Motor

    Applications

    There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
    There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
    The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

    Size

    The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
    The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
    Motor

    Cost

    A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
    In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
    Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
    Motor

    Maintenance

    Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
    Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
    Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
    Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

    China Economic 2kw 3 phase middle inertia ac brushless servo motor driver with Tamagawa encoder     ac motor	China Economic 2kw 3 phase middle inertia ac brushless servo motor driver with Tamagawa encoder     ac motor
    editor by czh 2023-02-18

    China AC Gear Motor Speed Reducers 1 phase 3 phase 110v 220v 380v induction gear motor for machine motor engine

    Warranty: 6 months, 1 year
    Model Number: 5IK90RGU
    Type: GEAR MOTOR, Induction Gear Motor
    Frequency: 50/60HZ, 50/60HZ
    Phase: Single-phase, Single/Three Phase
    AC Voltage: 110/220V
    Product name: AC Gear Motor
    Voltage: 110v/220v/380v
    Output Power: 6W~200W
    Application: Machine
    Ratio: 1:3~200
    Packing: Carton
    Packaging Details: Carton packing for AC induction gear motor
    Port: Any sea or air port in China

    AC Gear Motor Speed Reducers 110v 220v 380v induction gear motor 6W 60W 90W 120w 400W

    ModelAC Induction Gear Motor
    Sizes15W 70mm
    Ratio1:3~200
    ApplicationMachine

    More Products

    Company Information

    Testing Devices

    Certifications

    Packaging & Shipping

    FAQ
    Q : Why choose us ?A: a. With experiences over 10 years.
    b. Strict inspection and high quality with reasonable price.
    c. OEM service provided.
    d. Delivery time is short.Q: What kinds of bearing you supply?
    A: main products are ball bearing, plastic bearing, ceramic bearing, needle bearings and
    industrial tools, etc, as per customers’ drawings or samples.

    Q: When inspecting bearings, what should we need to consider?A: The precision of the bearings (dimension tolerance, loading rate), internal
    clearance and hardness under heat treatment, structure of cage and material.Q:Your product certifications?A: ISO 9001:2008, RoHS.

    Q: Can I have a sample order?A: Yes, it is available to check quality first. Mixed samples are also acceptable.

    Q: What about the lead time?A: 3-7 days for samples, 3-4 weeks for mass production.
    Q:What is your payment method?A: We accept T/T, PAYPAL or Western Union, credit card or via ALIBABA Assurance order.

    Benefits of a Planetary Motor

    Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
    Motor

    Solar gear

    The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
    A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
    Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
    A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

    Sun gear

    The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
    When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
    A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
    A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
    Motor

    Planetary gear

    A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
    Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
    Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
    The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

    Planetary gearbox

    A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
    A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
    A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
    Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
    Motor

    Planetary gear motor

    Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
    Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
    Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
    Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

    China AC Gear Motor Speed Reducers 1 phase 3 phase 110v 220v 380v induction gear motor for machine     motor engine	China AC Gear Motor Speed Reducers 1 phase 3 phase 110v 220v 380v induction gear motor for machine     motor engine
    editor by czh2023-02-09

    China AC Gear Motor Speed Reducers 1 phase 3 phase 110v 220v 380v induction gear motor for machine motor driver

    Warranty: 6 months, 1 year
    Model Number: 5IK90RGU
    Type: GEAR MOTOR, Induction Gear Motor
    Frequency: 50/60HZ, 50/60HZ
    Phase: Single-phase, Single/Three Phase
    AC Voltage: 110/220V
    Product name: AC Gear Motor
    Voltage: 110v/220v/380v
    Output Power: 6W~200W
    Application: Machine
    Ratio: 1:3~200
    Packing: Carton
    Packaging Details: Carton packing for AC induction gear motor
    Port: Any sea or air port in China

    AC Gear Motor Speed Reducers 110v 220v 380v induction gear motor 6W 60W 90W 120w 400W

    ModelAC Induction Gear Motor
    Sizes15W 70mm
    Ratio1:3~200
    ApplicationMachine

    More Products

    Company Information

    Testing Devices

    Certifications

    Packaging & Shipping

    FAQ
    Q : Why choose us ?A: a. With experiences over 10 years.
    b. Strict inspection and high quality with reasonable price.
    c. OEM service provided.
    d. Delivery time is short.Q: What kinds of bearing you supply?
    A: main products are ball bearing, plastic bearing, ceramic bearing, needle bearings and
    industrial tools, etc, as per customers’ drawings or samples.

    Q: When inspecting bearings, what should we need to consider?A: The precision of the bearings (dimension tolerance, loading rate), internal
    clearance and hardness under heat treatment, structure of cage and material.Q:Your product certifications?A: ISO 9001:2008, RoHS.

    Q: Can I have a sample order?A: Yes, it is available to check quality first. Mixed samples are also acceptable.

    Q: What about the lead time?A: 3-7 days for samples, 3-4 weeks for mass production.
    Q:What is your payment method?A: We accept T/T, PAYPAL or Western Union, credit card or via ALIBABA Assurance order.

    How to Select a Gear Motor

    A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

    Angular geared motors

    Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
    Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
    The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
    When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
    Motor

    Planetary gearboxes

    Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
    The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
    The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
    In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
    Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
    Motor

    Hydraulic gear motors

    Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
    A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
    The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
    Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
    Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
    Motor

    Croise motors

    There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
    A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

    China AC Gear Motor Speed Reducers 1 phase 3 phase 110v 220v 380v induction gear motor for machine     motor driver	China AC Gear Motor Speed Reducers 1 phase 3 phase 110v 220v 380v induction gear motor for machine     motor driver
    editor by czh2023-02-08

    China NEMA 34/86mm 48V 1000W High Torque 50rpm 200rpm 120nm Brushless DC 3 Phase Planetary Gear Motor with Brake for Lifting Equipment motor engine

    Solution Description

    BG 86BL DC Brushless Motor 
    Environmental Conditions -20ºC~50ºC
    Insulation Clase B
    Safety course IP44
    Sound ≤65dB
    Quantity of Poles/ phases eight/three
    Lifespan >5000h

    Electrical Specifications
    Design RATED LOAD NO LOAD   STALL
    Voltage   Power Pace Torque  Current    Speed    Current    Torque   Current 
    V W rpm N.m A rpm A   N.m   A  
    BG 86BL01 48 314 3000 one 8.five 4000 1   3   25.five
    BG 86BL02 48 400 3000 1.27 ten.eight 4000 one.five 3.81 32.4
    BG 86BL03 48 565 3000 1.8 fourteen.eight 4000 one.seventy five five.four 44.four
    BG 86BL04 310 800 3000 2.5 3.3 4000 .4 seven.5 nine.nine
    We can also personalize products in accordance to client specifications.

     

     Planetary Gear Motor Technical Knowledge-BG
    Ratio 3 six  10  24 36 64 96 216
    NO-load velocity 1333 666 250 166 111 62.5 forty one 18
    Rated velocity(rpm) 1000 500 187 a hundred twenty five 83 forty six 31 13
    Rated torque(N.m) two.7 5.four 8.5 20.four thirty.6 48 70 70

    Established in 1994, HangZhou BG Motor Manufacturing facility is a skilled manufacturer of brushless DC motors, brushed DC motors, planetary gear motors, worm equipment motors, Common motors and AC motors. We have a plant location of 6000 square meters, several patent certificates, and we have the unbiased design and style and development abilities and robust specialized pressure, with an once-a-year output of more than 1 million units. Since the beginning of its establishment, BG motor has targeted on the total answer of motors. We manufacture and design motors, give expert personalized solutions, respond speedily to client requirements, and actively aid clients to remedy problems. Our motor products are exported to twenty nations, such as the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
    Our founder, Mr. Sunshine, has a lot more than forty a long time of knowledge in motor engineering, and our other engineers also have far more than 15 years of encounter, and sixty% of our employees have far more than ten several years of knowledge, and we can assure you that the high quality of our motors is prime notch.
    The goods protect AGV, underwater robots, robots, sewing device market, cars, health-related equipment, computerized doors, lifting tools, industrial products and have a vast selection of apps.
    We try for CZPT in the high quality of each and every item, and we are only a tiny and innovative producer.
    Our vision: Generate the world forward and make existence better!

    Q:1.What sort of motors can you supply?

    A:At current, we mainly produce brushless DC motors, brush DC motors, AC motors, Universal Motors the power of the motor is significantly less than 5000W, and the diameter of the motor is not far more than 200mm

    Q:2.Can you send out me a cost checklist?

    A:For all of our motors, they are tailored primarily based on different demands like life time, sounds,voltage,and shaft and many others. The price also differs in accordance to yearly amount. So it truly is really hard for us to supply a price tag list. If you can share your thorough requirements and yearly quantity, we will see what provide we can provide.

    Q:3.Can l get some samples?

    A:It relies upon. If only a handful of samples for personalized use or replacement, I am afraid it’ll be tough for us to give simply because all of our motors are custom produced and no stock offered if there are no even more needs. If just sample screening prior to the official purchase and our MOQ,value and other terms are satisfactory,we’d adore to supply samples.

    Q4:Can you give OEM or ODM services?

    A:Yes,OEM and ODM are each offered, we have the professional R&D dept which can provide professional solutions for you.

    Q5:Can l check out your manufacturing facility prior to we place an purchase?

    A:welcome to pay a visit to our factory,wear each and every delighted if we have the chance to know every other much more.

    Q:6.What is actually the lead time for a standard buy?

    A:For orders, the common lead time is fifteen-twenty days and this time can be shorter or longer based on the different model,period of time and amount.

    US $129.99-199.99
    / Piece
    |
    2 Pieces

    (Min. Order)

    ###

    Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
    Operating Speed: Low Speed
    Excitation Mode: DC
    Function: Driving
    Casing Protection: Closed Type
    Number of Poles: Can Be Choosen

    ###

    Samples:
    US$ 0/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    ###

    Customization:

    ###

    BG 86BL DC Brushless Motor 
    Environmental Conditions -20ºC~50ºC
    Insulation Clase B
    Protection class IP44
    Noise ≤65dB
    Number of Poles/ phases 8/3
    Lifespan >5000h

    ###

    Electrical Specifications
    Model RATED LOAD NO LOAD   STALL
    Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
    V W rpm N.m A rpm A   N.m   A  
    BG 86BL01 48 314 3000 1 8.5 4000 1   3   25.5
    BG 86BL02 48 400 3000 1.27 10.8 4000 1.5 3.81 32.4
    BG 86BL03 48 565 3000 1.8 14.8 4000 1.75 5.4 44.4
    BG 86BL04 310 800 3000 2.5 3.3 4000 0.4 7.5 9.9
    We can also customize products according to customer requirements.

    ###

     Planetary Gear Motor Technical Data-BG
    Ratio 3 6  10  24 36 64 96 216
    NO-load speed 1333 666 250 166 111 62.5 41 18
    Rated speed(rpm) 1000 500 187 125 83 46 31 13
    Rated torque(N.m) 2.7 5.4 8.5 20.4 30.6 48 70 70
    US $129.99-199.99
    / Piece
    |
    2 Pieces

    (Min. Order)

    ###

    Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
    Operating Speed: Low Speed
    Excitation Mode: DC
    Function: Driving
    Casing Protection: Closed Type
    Number of Poles: Can Be Choosen

    ###

    Samples:
    US$ 0/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    ###

    Customization:

    ###

    BG 86BL DC Brushless Motor 
    Environmental Conditions -20ºC~50ºC
    Insulation Clase B
    Protection class IP44
    Noise ≤65dB
    Number of Poles/ phases 8/3
    Lifespan >5000h

    ###

    Electrical Specifications
    Model RATED LOAD NO LOAD   STALL
    Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
    V W rpm N.m A rpm A   N.m   A  
    BG 86BL01 48 314 3000 1 8.5 4000 1   3   25.5
    BG 86BL02 48 400 3000 1.27 10.8 4000 1.5 3.81 32.4
    BG 86BL03 48 565 3000 1.8 14.8 4000 1.75 5.4 44.4
    BG 86BL04 310 800 3000 2.5 3.3 4000 0.4 7.5 9.9
    We can also customize products according to customer requirements.

    ###

     Planetary Gear Motor Technical Data-BG
    Ratio 3 6  10  24 36 64 96 216
    NO-load speed 1333 666 250 166 111 62.5 41 18
    Rated speed(rpm) 1000 500 187 125 83 46 31 13
    Rated torque(N.m) 2.7 5.4 8.5 20.4 30.6 48 70 70

    Dynamic Modeling of a Planetary Motor

    A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

    planetary gear system

    A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
    In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
    A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
    Motor

    planetary gear train

    To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
    The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
    The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

    planetary gear train with fixed carrier train ratio

    The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
    To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
    The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
    Motor

    planetary gear train with zero helix angle

    The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
    Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
    Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

    planetary gear train with spur gears

    A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
    A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
    A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
    Motor

    planetary gear train with helical gears

    A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
    The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
    The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

    China NEMA 34/86mm 48V 1000W High Torque 50rpm 200rpm 120nm Brushless DC 3 Phase Planetary Gear Motor with Brake for Lifting Equipment     motor engine	China NEMA 34/86mm 48V 1000W High Torque 50rpm 200rpm 120nm Brushless DC 3 Phase Planetary Gear Motor with Brake for Lifting Equipment     motor engine
    editor by czh 2023-01-12